Good Morning! I'm new to using CAD models. I only used them in class. I created a manual plane, line, point alignment to make the model aligned with the machine. The problem I'm having is when I change my alignment or workplane, my points are no longer aligned with my model. They are offset and mess up my dimensions. Do I need to continually redo the manual alignment to keep everything where it should be or am I missing something else? Thanks in advance!
Sounds like to me his problem was ( and its really not a problem) that what he meat was he used the jog box when he said he created manual features...You can do this but this is where you need to use cad equals part....Then go to dcc mode and use auto features or program mode features which are measured features...His problem was that he used the jog box to do his manual features instead of just picking them off the cad model....It is that simple guys...
I used measure feature from the Quick Start window and selected my points from the CAD. When I was programming to begin with, I was using the measure feature and auto feature interchangeably, still selecting features from the model. The next program, I used only auto features with the same results. I'm also a she
I used measure feature from the Quick Start window and selected my points from the CAD. When I was programming to begin with, I was using the measure feature and auto feature interchangeably, still selecting features from the model. The next program, I used only auto features with the same results. I'm also a she
