Good Morning! I'm new to using CAD models. I only used them in class. I created a manual plane, line, point alignment to make the model aligned with the machine. The problem I'm having is when I change my alignment or workplane, my points are no longer aligned with my model. They are offset and mess up my dimensions. Do I need to continually redo the manual alignment to keep everything where it should be or am I missing something else? Thanks in advance!
Quick question. I noticed in
DAN_M pic of the calibration details (great stuff) that almost everything in the 'Measure Probe' window is NOT greyed out. With mine, everything is greyed out unless I select a Partial Calibration. I'm just curious, is this something that I'm missing? I believe I have calibration issues. At times I feel like I have it down, then at other times I feel confused because my A90B180 tip will take a point in a different Z location than if I took that same hit in A90B0 or A0B0, etc. Sorry if this isn't truly related, I can make a new post.
neil.challinor Okay, that makes sense. I was actually referring to Z hits off my part in relation to the CAD. More specifically, if I create an auto vector point at location 1 and take the hit, when I take that same hit in a different probe angle the Z of the same hit will be off in Z.
neil.challinor Okay, that makes sense. I was actually referring to Z hits off my part in relation to the CAD. More specifically, if I create an auto vector point at location 1 and take the hit, when I take that same hit in a different probe angle the Z of the same hit will be off in Z.
