hexagon logo
Register Sign in
  • Replies 8 replies
  • Subscribers 221 subscribers
  • Views 113 views
  • Users 0 members are here
Options
Related

Concentricity error on Pc-Dmis 2020R2

MelissaM10
Hello, I'm having trouble switching to R2. I have three all with Pcdmis 2020R1. When I opened Pcdmis r2 anything with concentricity gave me errors.

The error message I get is : Concentricity tolerances require input features that are concentric with the datum reference frame.

Now I did not write these programs and I'm afraid to change anything with out knowing if it will change the results. These are all programs that are used for production checks.

Also I noticed the profiles don't have a plus or minus tolerance. Is the result still the same?

Any help understanding this change will help me greatly Thanks in advance!
Parents
  • Check your considered feature and datum feature THEO values. It is possible that your nominal (THEO) values are not perfect, which would cause this error. For example, if your primary datum is a cylinder with axis along Z, make sure that the THEO vector is <0, 0, 1> and not <0.000034, -0.000430, .99999987> or something along those lines.
Reply
  • Check your considered feature and datum feature THEO values. It is possible that your nominal (THEO) values are not perfect, which would cause this error. For example, if your primary datum is a cylinder with axis along Z, make sure that the THEO vector is <0, 0, 1> and not <0.000034, -0.000430, .99999987> or something along those lines.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement