Read point

Hi everyone

!

1.What am i doing wrong? the readpoint wont move or even touch the part when i put the probe where i like to start.
the cad model was provided with the trihedron located where is shown in the picture. i also try putting a point where i like it the ZERO origin the read point and didn't work.

2. how can i put the CODE on here instead of copy and past?
3. i cant adjust my edit window. it is to high to click on the bar on top to move it. how can i fix this?

sorry, wont let me upload the picture.

STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
ALIGNMENT/END
MODE/MANUAL
FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
LOADPROBE/L5X100_M1
TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
MODE/DCC
PNT1 =FEAT/POINT,CARTESIAN
THEO/<0,0,0>,<0,0,1>
ACTL/<8.5828,0.4578,-13.8875>,<0,0,1>
READPOINT/
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/TRANS,XAXIS,PNT1
ALIGNMENT/TRANS,YAXIS,PNT1
ALIGNMENT/TRANS,ZAXIS,PNT1
ALIGNMENT/END

Parents

brian.freeman over 4 years ago

Yes, As you insert features, PC-DMIS will 'try to locate the features' in DCC Mode, such as this:

COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
Touch the top of the Flange approximately center.
DISPLAYPRECISION/6
PNT_SURF =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<412.625,95.888937,-41.958235>,<1,0,0>
ACTL/<410.314057,117.904863,-44.806254>,<1,0,0>
TARG/<412.625,95.888937,-41.958235>,<1,0,0>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
MODE/DCC
MOVE/INCREMENT,<0,0.25,0.25>
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/TRANS,ZAXIS,PNT_SURF
ALIGNMENT/TRANS,XAXIS,PNT_SURF
ALIGNMENT/TRANS,YAXIS,PNT_SURF
ALIGNMENT/END
PNT_R1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<-0.15,0.076063,0.85>,<0,1,0>
ACTL/<-0.149996,0.076336,0.849997>,<0,1,0>
TARG/<-0.15,0.076063,0.85>,<0,1,0>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
PNT_R2 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<-0.15,0.076063,-0.85>,<0,1,0>
ACTL/<-0.146919,0.064682,-0.806932>,<0,1,0>
TARG/<-0.15,0.076063,-0.85>,<0,1,0>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/ROTATE_CIRCLE,ZPLUS,TO,PNT_R2,AND,PNT_R1,ABOUT,XPL US
ALIGNMENT/END
MOVE/POINT,NORMAL,<0.25,0.4,-0.85>
PLN_10 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
THEO/<0,-0.4,0>,<1,0,0>
ACTL/<0.000576,-0.399999,0.000002>,<0.9999912,0.0014696,0.0039394>
TARG/<0,-0.4,0>,<1,0,0>
ANGLE VEC=<0,0,-1>,RADIAL
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
A3 =ALIGNMENT/START,RECALL:A2,LIST=YES
ALIGNMENT/LEVEL,XPLUS,PLN_10
ALIGNMENT/TRANS,XAXIS,PLN_10
ALIGNMENT/END

Then I will refine the alignment until all 6DOF are contained

Reply

brian.freeman over 4 years ago

Yes, As you insert features, PC-DMIS will 'try to locate the features' in DCC Mode, such as this:

COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
Touch the top of the Flange approximately center.
DISPLAYPRECISION/6
PNT_SURF =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<412.625,95.888937,-41.958235>,<1,0,0>
ACTL/<410.314057,117.904863,-44.806254>,<1,0,0>
TARG/<412.625,95.888937,-41.958235>,<1,0,0>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
MODE/DCC
MOVE/INCREMENT,<0,0.25,0.25>
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/TRANS,ZAXIS,PNT_SURF
ALIGNMENT/TRANS,XAXIS,PNT_SURF
ALIGNMENT/TRANS,YAXIS,PNT_SURF
ALIGNMENT/END
PNT_R1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<-0.15,0.076063,0.85>,<0,1,0>
ACTL/<-0.149996,0.076336,0.849997>,<0,1,0>
TARG/<-0.15,0.076063,0.85>,<0,1,0>
SNAP=NO
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
PNT_R2 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<-0.15,0.076063,-0.85>,<0,1,0>
ACTL/<-0.146919,0.064682,-0.806932>,<0,1,0>
TARG/<-0.15,0.076063,-0.85>,<0,1,0>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/ROTATE_CIRCLE,ZPLUS,TO,PNT_R2,AND,PNT_R1,ABOUT,XPL US
ALIGNMENT/END
MOVE/POINT,NORMAL,<0.25,0.4,-0.85>
PLN_10 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
THEO/<0,-0.4,0>,<1,0,0>
ACTL/<0.000576,-0.399999,0.000002>,<0.9999912,0.0014696,0.0039394>
TARG/<0,-0.4,0>,<1,0,0>
ANGLE VEC=<0,0,-1>,RADIAL
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
A3 =ALIGNMENT/START,RECALL:A2,LIST=YES
ALIGNMENT/LEVEL,XPLUS,PLN_10
ALIGNMENT/TRANS,XAXIS,PLN_10
ALIGNMENT/END

Then I will refine the alignment until all 6DOF are contained

Children

No Data