Hi, guys do you know how can i access pointinfo values from new geometric tolerance 2021.1 in basic? I know how to get point data from features but i need to get deviation vaules for each point of profile geo tol like it is in text analysis or pointinfo of dimensions. Please help.
For a scan or a feature set, you can assign : ASSIGN/TVAL=DOT((SCN1.XYZ-SCN1.TXYZ),SCN1.TIJK) which will give an array of t-values.
If you do this method, make sure your alignment is correct. The OP question is on extracting deviations from the geometric tolerance which would have the datums called out and do the alignment for you. To get the correct point deviations straight from the feature, the alignment must be exactly right.
For a scan or a feature set, you can assign : ASSIGN/TVAL=DOT((SCN1.XYZ-SCN1.TXYZ),SCN1.TIJK) which will give an array of t-values.
If you do this method, make sure your alignment is correct. The OP question is on extracting deviations from the geometric tolerance which would have the datums called out and do the alignment for you. To get the correct point deviations straight from the feature, the alignment must be exactly right.
