Probe build:
PH10MQ, SP25, SP25-4, Exten5way, Empty connection, 1-4 = 2by40mm
Opt Probe Settings:
ACCELERATION/MAXACCELX=150, MAXACCELY=150, MAXACCELZ=150
OPTIONPROBE/MAXFORCE=0.15,LOWFORCE=0.025,UPPERFORCE=0.075,TRIG GERFORCE=0.05,
PROBEACCURACY=0.1,POSACCURACY=0.1,#RETURNDATA=10,
RETURNSPEED=1,SCANPNTDENSITY=10,
SCANACCELERATION=10,SCANOFFSETFORCE=0.05,
PROBINGMODE=DFL,MANFINEPROBING=NO
I have found with this particular setup that I can calibrate any INDIVIDUAL tip angle through the Probe Dialogue box.
DCC+DCC, Prehit/Retract = 0.15, Move Speed = 200, Touchspeed = 3
Through the Probe Dialogue box or through AutoCalibration; if I select 2 or more tip angles, the first angle will run through without any issues. The follow up angle(s) will get a statement: "Scan has no measured points after execution. It will be marked as skipped during execution."
Things attempted:
Closed software
Deleted original files (prb/results)
Restarted PC/Controller
Opened PCDMIS 2020R2 Build 601 SP10
Remade probefile
Attempted calibrations with above results.
Anyone else experience something like this, or have ideas on how to proceed?
