tip0.3 mm with SP600

Hello together

i have to measure a part with a tip 0.3mm ,
the feature is 0.3 mm high, autoelement programmed with sample hit and deep, (432x)
I use a SP600 with the standard values, triggeroptions.

Measurement is made by tactile probing.
These values kills my tip, program runs over night (10 hours).
This morning my colleague sends me a message the ball of the tip is missing.
Now my Question. can someone tell me SP600 low force values for recommendation ?

my other idea is to change to tp20 with low force module, or TP200 with low force module

thanks in advance

Greeting from Germany

Dieter

Attached Files

Benedictj1 over 2 years ago

you need a low force module
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
JEFMAN over 2 years ago

You can decrease scan acceleration (in F10) (3mm/s2), decrease scan offset force (0.06) and lower force (0.04).
It could work.
The problem with this stylus is, when you lose the ball, you can't see it !!!!!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Trimess over 2 years ago

You can decrease scan acceleration (in F10) (3mm/s2), decrease scan offset force (0.06) and lower force (0.04).
It could work.
The problem with this stylus is, when you lose the ball, you can't see it !!!!!

I will try the settings
(and yes, its very difficult to see if the ball is still alive :-) )
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
DAN_M over 2 years ago

I use 0.3mm balls a lot on TP20s with LOW FORCE modules. MOVESPEED at 250mm/sec and TOUCHSPEED is 1.5mm/sec. With those values, I see STDDEV of 0.00008"-0.00015" & probes have lasted 2+ years.

I would never drag scan with a probe this delicate, would probably destroy it in a day

As long as you have speeds correctly configured on your end & as long as your parts are clean, your machine shouldn't be killing your tips
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Trimess over 2 years ago

considering the timeline i use the TP20 with LF Module
the beginning looks good.
the part runs over night. we will see what's happening

thanks for your input
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Beck's over 2 years ago in reply to Trimess

Hoffen kneten beten
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel