hexagon logo

Repère avion (help me)

Bonjour
j'ai un soucis, j'ai une pièce en repère avion, dans la CAO le repère se trouve a 4000mm de la pièce à contrôler.
j'ai créer un repère sur la pièce afin de pouvoir la mesurer mais le résultat du contrôle doit être exprimé dans le repère avion, je suis un peux perdu.
pour l'instant suite a mes essais, je n'arrive pas a retranscrire les résultats dans le repère avion.

avez vous une démarche simple a comprendre pour résoudre mon problème.

merci
Parents
  • The most common method for measuring in airplane or car alignment is to use an iterative alignment, this is kind of a best fit alignment but the CAD remains in car/plane coordinate system. This isn't very easy to explain here, although there are threads which cover this.

    However, if your part has geometric datums (defined plans, holes etc) you can create an alignment of these features (which will move out of airplane coordinates), then in the Setup (F5) there is a tick box to 'force alignment in car coordinates' or something like that, which will revert your measurements to airplane coordinates.
Reply
  • The most common method for measuring in airplane or car alignment is to use an iterative alignment, this is kind of a best fit alignment but the CAD remains in car/plane coordinate system. This isn't very easy to explain here, although there are threads which cover this.

    However, if your part has geometric datums (defined plans, holes etc) you can create an alignment of these features (which will move out of airplane coordinates), then in the Setup (F5) there is a tick box to 'force alignment in car coordinates' or something like that, which will revert your measurements to airplane coordinates.
Children
No Data