New Release! PC-DMIS 2021.2 SP6 (hexagonmi.com)
https://downloads.ms.hexagonmi.com/PC-DMIS-Versions/Release/2021.2/SP6/x64
Release Notes - 2021.2 SP6
*************************************
Application Errors
*************************************
You no longer get application errors:
• When you change the constructed type from the Edit window. See PCD-185705.
• When you use the Backspace key to edit an existing tolerance in the Extended
Sheet Metal Features dialog box. See PCD-227394.
• When you have a corrupt settings.xml file. See PCD-227403.
• When you click the Measure All button in the LeapFrog / Relocation dialog box.
See PCD-227821.
• When you apply a filter to a constructed circle that uses vision hit data. See
PCD-229858.
• When you select a feature and click Measure in the Bundle Alignment dialog box.
See PCD-230512.
• When you load measurement routines from previous versions that contain toolkit
features and legacy dimensions. See PCD-230527.
• When you click the Global Used button in the Probe Utilities dialog box. See
PCD-230938.
*************************************
Constructed Extracted Features
*************************************
• The Gaussian filter option now works correctly in the Construct Filter Feature
dialog box. See PCD-222129.
• PC-DMIS now computes constructed extracted features correctly without CAD when
you select a COP in the Construct feature dialog box. See PCD-225667.
*************************************
GD&T Dimensions
*************************************
• You can now see the out-of-tolerance value in the XML statistics output file for
legacy profile dimensions. See PCD-214720.
• You can now reference a constructed Cast, Drop, Offset, or Vector Distance
Point with the geometric tolerance command either as a tertiary datum or as the
considered feature for the position. See PCD-215129.
• PC-DMIS now no longer takes a long time to open a measurement routine with
profile surface dimensions. See PCD-221387.
• PC-DMIS now supports laser Round and Square Slots for a geometric tolerance
Profile command when you set the ITERATEANDREPIERCE option to YES. See
PCD-225171.
• PC-DMIS now correctly re-displays the geometric tolerance feature list after you
report conicity with the active Geometric Tolerance dialog box. See PCD-227395.
• PC-DMIS can now report the conicity of an Auto Cone (Adaptive Line Strategy) from
the Geometric Tolerance dialog box. See PCD-227396.
• If you have a geometric tolerance command for a circular runout of a cone, PCDMIS
now correctly draws the tolerance band around the feature instead of around the
alignment origin. See PCD-229599.
• PC-DMIS no longer removes features from the multi-features DATDEF command in
the Edit window when you press F9 and click OK in the Datum Definition dialog
box. See PCD-230085.
*************************************
HxGN Metrology Reporting
*************************************
• PC-DMIS can now send additional geometrical feature data and CAD details to
HxGN Metrology Reporting. See PCD-220590, PCD-221158, PCD-225506, and
PCD-226061.
*************************************
Legacy Dimensions
*************************************
• You can now see the correct TP bonus value when you perform a partial execution
and don't execute that dimension. See PCD-226987.
*************************************
Mesh
*************************************
• You can now use Mesh Reset functionality through automation. See PCD-227726.
*************************************
Pointcloud
*************************************
• PC-DMIS now includes all the CAD surfaces in a surface colormap. See
PCD-221424.
• PC-DMIS now calculates the positions for the COP command points correctly
when you import a COP file multiple times through the Append function. See
PCD-228052.
• You can now select and deselect items in the Mesh Operator and Pointcloud
Operator dialog boxes after you re-open the dialog boxes. See PCD-230687.
*************************************
Probes
*************************************
• You can now access the Fast Probe mode through automation. See PCD-230819.
*************************************
Q-DAS Configurator
*************************************
• PC-DMIS now sends the Q-DAS tracefields to the Blade report (.rpt) file. See
PCD-227797.
• PC-DMIS now generates a .dfq file when you execute a measurement routine in
Chinese languages. See PCD-229837.
• You can now use the File | Update from DFQ file option in Chinese languages. See
PCD-231304.
• You can now access the help from the application's Help menu option. See
PCD-231380.
• PC-DMIS now sends the K8500 and K8501 values to a .dfq file when you set the
Value From property to Trace in the Setup K-Field Configuration dialog box. See
PCD-231741.
*************************************
Reporting
*************************************
• PC-DMIS now applies the report modifications properly when you use the
AnalysisWindow object. See PCD-205067.