https://support.hexagonmi.com/s/article/New-Release-PC-DMIS-2022-1
Application Errors
You no longer get application errors:
• When you change the constructed type from the Edit window. See PCD-185705.
• When you measure vision Auto features and then select File | Quit or File | Exit.
See PCD-220746.
• When you have a corrupt settings.xml file. See PCD-227403.
• When you click the Measure All button in the LeapFrog / Relocation dialog box.
See PCD-227821.
• When you load measurement routines from previous versions that contain toolkit
features and legacy dimensions. See PCD-230527.
• When you click the Global Used button in the Probe Utilities dialog box. See
PCD-230938.
Constructed Features
• PC-DMIS now allows the selection of individual hits in constructed features. See
PCD-208288.
DMIS
• You can now see the Clearplane definitions (CLEAR/) and MOVE/CLEARPLANE
commands after you import DMIS files and you set PC-DMIS to a non-English
language. See PCD-231991.
GD&T Dimensions
• You can now reference a constructed Cast, Drop, Offset, or Vector Distance
Point with the geometric tolerance command either as a tertiary datum or as the
considered feature for the position. See PCD-215129.
• PC-DMIS now allows you to insert an ISO Size command when you define it as
a DATDEF command. This prevents PC-DMIS from displaying a message that
wouldn't allow you to insert ISO Size commands. See PCD-223638.
• PC-DMIS now remembers the state of the DF (feature diameter) check box in the
Nominals tab of the Geometric Tolerance dialog box when you create tolerances
and keep the dialog box open to create subsequent tolerances. See PCD-231009.
• PC-DMIS now deselects the selected features in the Graphic Display window after
you create features from the Geometric Tolerance dialog box. See PCD-231497.
Graphic Display Window
• PC-DMIS now shows the measured hits correctly for orientation tolerances in the
Graphic Display window. See PCD-230172.
• PC-DMIS now shows the measured hits for a feature at the correct location in the
Graphic Display window. See PCD-230403.
HxGN Metrology Reporting
• PC-DMIS can now send additional geometrical feature data to HxGN Metrology
Reporting. See PCD-220590.
Legacy Dimensions
• PC-DMIS now shows the correct deviation arrows for CAD graphical analysis of
legacy orientation dimensions (Perpendicularity, Angularity, and Parallelism) when
you report axial features (Lines, Cones, and Cylinders). See PCD-231417.
Pointcloud
• You can now select and deselect items in the Mesh Operator and Pointcloud
Operator dialog boxes after you re-open the dialog boxes. See PCD-230687.
Probes
• You can now access the Fast Probe mode through automation. See PCD-230819.
Q-DAS Configurator
• PC-DMIS now generates a .dfq file when you execute a measurement routine in
Chinese languages. See PCD-229837.
• You can now use the File | Update from DFQ file option in Chinese languages. See
PCD-231304.
• You can now access the help from the application's Help menu option. See
PCD-231380.
• PC-DMIS now sends the K8500 and K8501 values to a .dfq file when you set the
Value From property to Trace in the Setup K-Field Configuration dialog box. See
PCD-231741.
Settings Editor
• You can now see the tool changer calibration settings in Settings Editor. See
PCD-232638.
Vision
• PC-DMIS now changes the pixel size correctly when you use the pixel size overlay
slider in the live image view of the Vision tab. See PCD-231051.