In 2021 PC-DMIS When Dimension the size of DIA it defaults with the local size and then UAME. Is there a way to get PC-DMIS to only show one of these? We export our data into a inspection software and having two results for one item number is causing problems. I know one option is using the location DIM, but according to the teacher a hexagon when doing that the standards aren't being applied to the data.
Use the Location DIM, measure the diameter as Max Inscribed (inside diameter) or Min Circumscribed (outside diameter) and add a circularity dimension as a reference with a 0.002" tolerance.
F9 the dimension>Go to 'Reporting' tab>Modify the selections you have in 'Math' and 'Size'. You can also go to 'Nominals' tab and un/check the DF to modify its reporting.
F9 the dimension>Go to 'Reporting' tab>Modify the selections you have in 'Math' and 'Size'. You can also go to 'Nominals' tab and un/check the DF to modify its reporting.
OP is not dimensioning a TP. OP is using the SIZE feature within Insert-Dimension.
OP is not dimensioning a TP. OP is using the SIZE feature within Insert-Dimension.
Never knew that was an actual option, I've always continued to report a size through location, or through 'DF' in a GeoTol output.
Now I see that I'm glad I continue to report in those styles.
Never knew that was an actual option, I've always continued to report a size through location, or through 'DF' in a GeoTol output. Now I see that I'm glad I continue to report in those styles.
