Here is a link to a recent topic about the same thing. No one chimed in on a way to turn it off, but you can at least change the color of the highlight. ¯\_(ツ)_/¯
Thank you
Cris_C this is another disheartening shortcoming of the software in a long line of enhancement's that don't enhance. Hopefully
cvelisetty can shed some light on if its possible to disable this at all.
Unfortunately there is no toggle off button that I am aware of. I had voiced out this to our dev team on all your behalf. Let me resurface the request in our internal system. I will keep you all posted. There are few more who literally wanted to turn this off forever in their systems.
Unfortunately there is no toggle off button that I am aware of. I had voiced out this to our dev team on all your behalf. Let me resurface the request in our internal system. I will keep you all posted. There are few more who literally wanted to turn this off forever in their systems.
Thank You! It makes sense for manual systems and even if you use manual alignments on a DCC system but after that there is really no need on a DCC system if the machine is running on its own.
Make stuff optional (possible to toggle it on/off) - like this highlighting for example. This should be enabled for manual mode, but be possible to toggle it off for DCC mode. Personally, I want the highlighting to be enabled during DCC, it would be nice to have the graphics window zoom out after finishing a feature and (rotate/move if needed) zoom in on the feature about to be measured. if the features are close to each other, the zoom out/pan/rotate isn't needed.
