New Release! PC-DMIS 2020 R2 Base Release, SP1-13 (hexagonmi.com)
https://downloads.ms.hexagonmi.com/P...20_R2/SP13/x64
Release Notes - 2020 R2 SP13
************************************************** *
Application Errors
************************************************** *
You no longer get application errors:
• When you change the constructed type from the Edit window. See PCD-185705.
• When you measure vision Auto features and then select File | Quit or File | Exit.
See PCD-220746.
• When you select a feature and click Measure in the Bundle Alignment dialog box.
See PCD-230512.
• When you click the Global Used button in the Probe Utilities dialog box. See
PCD-230938.
************************************************** *
Constructed Features
************************************************** *
• PC-DMIS now allows the selection of individual hits in constructed features. See
PCD-208288.
• PC-DMIS now no longer duplicates features in the feature list of the Construct
dialog box that are referenced multiple times in the measurement routine. See
PCD-231267.
************************************************** *
GD&T Dimensions
************************************************** *
• You can now reference a constructed Cast, Drop, Offset, or Vector Distance
Point with the geometric tolerance command either as a tertiary datum or as the
considered feature for the position. See PCD-215129.
• PC-DMIS now allows you to insert an ISO Size command when you define it as
a DATDEF command. This prevents PC-DMIS from displaying a message that
wouldn't allow you to insert ISO Size commands. See PCD-223638.
• PC-DMIS now supports laser Round and Square Slots for a geometric tolerance
Profile command when you set the ITERATEANDREPIERCE option to YES. See
PCD-225171.
• PC-DMIS now correctly re-displays the geometric tolerance feature list after you
report conicity with the active Geometric Tolerance dialog box. See PCD-227395.
• PC-DMIS can now report the conicity of an Auto Cone (Adaptive Line Strategy) from
the Geometric Tolerance dialog box. See PCD-227396.
• If you have a geometric tolerance command for a circular runout of a cone, PCDMIS now correctly draws the tolerance band around the feature instead of around
the alignment origin. See PCD-229599.
• PC-DMIS no longer removes features from the multi-features DATDEF command in
the Edit window when you press F9 and click OK in the Datum Definition dialog
box. See PCD-230085.
• PC-DMIS now remembers the state of the DF (feature diameter) check box in the
Nominals tab of the Geometric Tolerance dialog box when you create tolerances
and keep the dialog box open to create subsequent tolerances. See PCD-231009.
• PC-DMIS now deselects the selected features in the Graphic Display window after
you create features from the Geometric Tolerance dialog box. See PCD-231497.
************************************************** *
Graphic Display Window
************************************************** *
• PC-DMIS now shows the measured hits correctly for orientation tolerances in the
Graphic Display window. See PCD-230172.
************************************************** *
Legacy Dimensions
************************************************** *
• You can now see the correct TP bonus value when you perform a partial execution
and don't execute that dimension. See PCD-226987.
************************************************** *
Pointcloud
************************************************** *
• PC-DMIS no longer adds extra points to the pointcloud data when you use the
Pointcloud Export command. See PCD-230147.
************************************************** *
Q-DAS Configurator
************************************************** *
• PC-DMIS now sends the Q-DAS tracefields to the Blade report (.rpt) file. See
PCD-227797.
• PC-DMIS now generates a .dfq file when you execute a measurement routine in
Chinese languages. See PCD-229837.
• You can now use the File | Update from DFQ file option in Chinese languages. See
PCD-231304.
• PC-DMIS now sends the K8500 and K8501 values to a .dfq file when you set the
Value From property to Trace in the Setup K-Field Configuration dialog box. See
PCD-231741.
************************************************** *
Reporting
************************************************** *
• PC-DMIS now applies the report modifications properly when you use the
AnalysisWindow object. See PCD-205067.