{"data-align":"none","data-size":"full","data-attachmentid":519684} I am using PCDMIS 2020 and was wondering how i would go about dimensioning this distance?
From the blue print, it looks like the lowest point is on the arc, so I would measure R2 +-0.2 first. The center should be 3.3 +-0.3 to the plane
I would say it's the distance between tangent of both radii, so I would use a 2D distance between circles with add radius on both circles (2d distance parallel to part axis)
For me it clear that it is the distance between the extremity points of DIA 328.5 and R2. I wouldn't use R3 at all since it can be tricky to probe and for the R2 I would go with the high point as suggested before.
