Does anyone have an idea why a Ø1.7714 +.0003/-.0002 would show 1.7727 when I use it in a true position, but show 1.7715 when I use it in a standard location box? Both ways I'm using the same measures cylinder (scanned 3 levels). I'm running PCD v2022.1
Location dimension will be using the feature math type (last squares/Mac inscribed or whatever you have it set to.
The position dimension will be using the relating mating envelope (so maximum size for hole, minimum size for OD as orientated to the datum system in the control frame).
Location dimension will be using the feature math type (last squares/Mac inscribed or whatever you have it set to.
The position dimension will be using the relating mating envelope (so maximum size for hole, minimum size for OD as orientated to the datum system in the control frame).