If using Legacy then create a new alignment level to Datum 'A' and set the centre origin at Datum 'B' then dimension the face. But why not use Xact Define the bore as Datum 'B ' and the face as Datum 'A'. Select the feature set tol select the two datums in correct order A, B .
If using Legacy then create a new alignment level to Datum 'A' and set the centre origin at Datum 'B' then dimension the face. But why not use Xact Define the bore as Datum 'B ' and the face as Datum 'A'. Select the feature set tol select the two datums in correct order A, B .