iterativo help!!

I dont do iteratives often, but when i do, i ask you guys for help.

ill post a drawing and i would like some guidelines how to align this.
3 points on A, 2 points on B, 1 point on C?
not really sure how to go about the C one

Attached Files

Parents

cheesiechanman over 1 year ago

SCN1 =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=75,SHOW HITS=NO,SHOWALLPARAMS=NO
MEAS/SCAN
BASICSCAN/LINE,NUMBER OF HITS=75,SHOW HITS=NO,SHOWALLPARAMS=NO
ENDSCAN
ENDMEAS/
ASSIGN/V1=(MININDEX(SCN1.HIT[1..SCN1.NUMHITS].Y))
ASSIGN/ZERO=0
ASSIGN/ONE=1
ROTATION =GENERIC/POINT,DEPENDENT,CARTESIAN,$
NOM/XYZ,<SCN1.HIT[V1].TX,SCN1.HIT[V1].TY,SCN1.HIT[V1].TZ>,$
MEAS/XYZ,<SCN1.HIT[V1].X,SCN1.HIT[V1].Y,SCN1.HIT[V1].Z>,$
NOM/IJK,<ZERO,ONE,ZERO>,$
MEAS/IJK,<ZERO,ONE,ZERO>

This is the MININDEX same idea

This will work however you will need to align to Datum B, Rotate your axis the 62 Degrees and then get the max hit. Without an alignment I'm not sure what would quantify as the Max point.

Reply

cheesiechanman over 1 year ago

SCN1 =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=75,SHOW HITS=NO,SHOWALLPARAMS=NO
MEAS/SCAN
BASICSCAN/LINE,NUMBER OF HITS=75,SHOW HITS=NO,SHOWALLPARAMS=NO
ENDSCAN
ENDMEAS/
ASSIGN/V1=(MININDEX(SCN1.HIT[1..SCN1.NUMHITS].Y))
ASSIGN/ZERO=0
ASSIGN/ONE=1
ROTATION =GENERIC/POINT,DEPENDENT,CARTESIAN,$
NOM/XYZ,<SCN1.HIT[V1].TX,SCN1.HIT[V1].TY,SCN1.HIT[V1].TZ>,$
MEAS/XYZ,<SCN1.HIT[V1].X,SCN1.HIT[V1].Y,SCN1.HIT[V1].Z>,$
NOM/IJK,<ZERO,ONE,ZERO>,$
MEAS/IJK,<ZERO,ONE,ZERO>

This is the MININDEX same idea

This will work however you will need to align to Datum B, Rotate your axis the 62 Degrees and then get the max hit. Without an alignment I'm not sure what would quantify as the Max point.

Children

No Data