Using TP20, 3 way (T-shaped) build. Taking about 50 vector points around a cylinder and constructing a cylinder (least squared). Output cylindricity and it measured 0.0024" yesterday afternoon. Calibrated the probe this morning, re ran the same part and cylindercity measured 0.0011". All the other diameters and distances measured were different by 0.0001"-0.0002".
My first thought is: Did the part move between yesterday afternoon and this morning causing this mornings points to be taken in a different place than yesterday afternoon?
My first thought is: Did the part move between yesterday afternoon and this morning causing this mornings points to be taken in a different place than yesterday afternoon?