Afternoon all. I had an issue today where 2 of my programs will no longer load my cad model, and one of them wont open at all. All of our programs are saved onto the company's network. They have spent a lot of money on the network so I know its top end. That being said has anyone ever had trouble saving and running programs off of a network? The 2 programs are rather large and I would rather not have to reprogram 1 or both of them.
If only those two programs are having trouble and you're still able to run other programs off of the network, then the culprit would be those programs and not your network?
Do they run fine if you copy them locally?
I've had an occasional program throw a serialization error when something drastic happened, like a power failure during a high-density scan calculation which corrupted the entire program. Which then required a restore from our network backup system. This has largely gone away since I've made all the network programs Read Only.
If only those two programs are having trouble and you're still able to run other programs off of the network, then the culprit would be those programs and not your network?
Do they run fine if you copy them locally?
I've had an occasional program throw a serialization error when something drastic happened, like a power failure during a high-density scan calculation which corrupted the entire program. Which then required a restore from our network backup system. This has largely gone away since I've made all the network programs Read Only.
