Have the roundness of an auto-circle in a variable

Hi there,

I am trying to have the roundness of an auto-element in a variable. I cannot use a dimension as I have 30,000 circles and try to export all of these roudnesses via a script to a txt file.

Does anyone knows how to call the roundness of an auto-circle into a variable?

Thanks in advance.

Parents

Henniger123 over 1 year ago

hi,

you can try it out and see if it works.
Unfortunately, I didn't have any measurement data to hand,
so I don't know exactly if this works, but looks good so far.

basically it's like @ R2ah1ze1l said
Note that with this variant, the names of the circles should be countable like this: NAME_1 NAME_2 NAME_n
however the "name"-part can be changed, (only make sure you can count it up)

            ASSIGN/VCOUNT_MAX=4
            ASSIGN/VCOUNT_ACTUAL=0
            ASSIGN/VROUNDNESS=0

            WHILE/VCOUNT_ACTUAL < VCOUNT_MAX

              ASSIGN/VCOUNT_ACTUAL=VCOUNT_ACTUAL+1
              ASSIGN/VNAME="NAME_"+STR(VCOUNT_ACTUAL)

RND          =GEOMETRIC_TOLERANCE/STANDARD=ISO 1101,SHOWEXPANDED=YES,
              FEATURE_MATH=DEFAULT,
              UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
              SEGMENT_1,CIRCULARITY,0.01,TOL_ZONE_MATH=DEFAULT,
              TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
                MEASURED:
                  NAME_4:0.000,
              FEATURES/VNAME,,

  $$ YES,
              VNAME
  $$ YES,
              RND.SEGMENT[1].FEATURE[1].MEAS

              ASSIGN/VROUNDNESS[VCOUNT_ACTUAL]=RND.SEGMENT[1].FEATURE[1].MEAS

            END_WHILE/

Reply

Henniger123 over 1 year ago

            ASSIGN/VCOUNT_MAX=4
            ASSIGN/VCOUNT_ACTUAL=0
            ASSIGN/VROUNDNESS=0

            WHILE/VCOUNT_ACTUAL < VCOUNT_MAX

              ASSIGN/VCOUNT_ACTUAL=VCOUNT_ACTUAL+1
              ASSIGN/VNAME="NAME_"+STR(VCOUNT_ACTUAL)

RND          =GEOMETRIC_TOLERANCE/STANDARD=ISO 1101,SHOWEXPANDED=YES,
              FEATURE_MATH=DEFAULT,
              UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
              SEGMENT_1,CIRCULARITY,0.01,TOL_ZONE_MATH=DEFAULT,
              TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10,
                MEASURED:
                  NAME_4:0.000,
              FEATURES/VNAME,,

  $$ YES,
              VNAME
  $$ YES,
              RND.SEGMENT[1].FEATURE[1].MEAS

              ASSIGN/VROUNDNESS[VCOUNT_ACTUAL]=RND.SEGMENT[1].FEATURE[1].MEAS

            END_WHILE/

Children

No Data