https://downloads.ms.hexagonmi.com/PC-DMIS-Versions/Release/2021.2/SP9/x64
Application Errors
*************************************
You no longer get application errors:
• When you execute a scan multiple times. See PCD-97274.
• When you use the MaxIndex or MinIndex expressions in a measurement routine.
See PCD-232237.
• When you open a measurement routine with a vision feature referenced by the
Geometric Tolerance command. See PCD-233718.
• When you generate a graphical analysis for Geometric Tolerance commands. See
PCD-233923.
• When you work with the Size command. See PCD-236582.
• When you right-click and drag commands in Summary mode. See PCD-237608.
Several changes were made to improve the stability of the application.
*************************************
Auto Features
*************************************
• You can now see improved accuracy of directly measured laser Auto features.
This ensures the integrity of the internal pointcloud data on multiple executions of
measurement routines. See PCD-229715.
• PC-DMIS now moves the probe to the correct location based on the move points
that immediately follow a four-axis scan. See PCD-237186.
*************************************
DCI
*************************************
• You no longer need to change the Current value of the Release settings under the
Catia5 section in the PC-DMIS Settings Editor when you import a CATIA V5 CAD
file. See PCD-237690.
*************************************
GD&T Dimensions
*************************************
• PC-DMIS measurement routines that use the CWS sensor no longer hang up when
executed on DC machines. See PCD-226191.
• You can now see the correct size tolerance value in the Geometric Tolerance
dialog box when you use the ASME standard. See PCD-236466.
• PC-DMIS now allows laser scans for a profile or surface when you use a CWS
probe for Patch, Freeform, Linear Open, and Perimeter scans. See PCD-237052.
*************************************
Laser Feature Extraction
*************************************
• PC-DMIS no longer hangs when you execute a measurement routine with the
AICON_OFFLINE portable interface set. See PCD-234440.
*************************************
Legacy Dimensions
*************************************
• PC-DMIS now added the width to the ISO tolerance feature list so that you can
select the width feature in the Feature Location dialog box. See PCD-211385.
*************************************
Notifications Center
*************************************
• PC-DMIS now supports the version 3.8 message light firmware that autodetects
Bluetooth devices with the name "HexagonLED" along with BT6Out. See
PCD-231450.
*************************************
Paste with Pattern
*************************************
• You can now type more decimal places in the Step box on the Curve tab of the
Pattern Setup dialog box. See PCD-220764.
*************************************
Probes
*************************************
• PC-DMIS no longer shows the measurement routine incorrectly in the Edit window
after PC-DMIS shows the Calibration Results dialog box. See PCD-230746.
*************************************
Reporting
*************************************
• PC-DMIS now outputs the tracefield values to the CSV file when you select
the Delete Empty and the Report Tracefield check boxes in the Output
Configuration dialog box. See PCD-219817.
*************************************
Temperature Compensation
*************************************
• PC-DMIS now shows the Manual Temperature dialog box when you execute
a measurement routine that contains manual temperature compensation. See
PCD-221872.