i need help with a big part with iterative

Hey guys
so i have this big part, that the datums are defined by 3 datums points (three holes with sample hits that i did iterative with). I then constructed three theorietical planes (alignment planes) and defined those as ABC. Then i measured all the different features on the parted and called them out using FCF position.
the program works well, but some of my results gets weirdly high.
Ill upload pics with the datum targets (see black circles)

Attached Files

Parents

Liambo734 over 1 year ago

vpt.se


A2 =UPPRIKTNING/START,ÅTERKALLA:A1,LISTA=JA
UPPRIKTNING/ITERERA
MÅLPKT-RADIE=0.5,STARTMÄRKE=L1,FIXTURTOLERANS=0.05,FELLÄG E=
MÄT ALLA ELEM.=ALLTID,MAX_ANT_ITERATIONER=3,PRIMÄRAXEL=Y-AXEL,SEKUNDÄRAXEL=Z-AXEL,NOLLPUNKTSAXEL=X-AXEL
PRIMÄR=CIR_A1,CIR_A2,CIR_A3,,
SEKUNDÄR=CIR_A1,CIR_A2,,
NOLLPUNKT=CIR_A1,CIR_A2,,
UPPRIKTNING/****

The origin in the alignment should only be using one of the circles

Reply

Liambo734 over 1 year ago

vpt.se


A2 =UPPRIKTNING/START,ÅTERKALLA:A1,LISTA=JA
UPPRIKTNING/ITERERA
MÅLPKT-RADIE=0.5,STARTMÄRKE=L1,FIXTURTOLERANS=0.05,FELLÄG E=
MÄT ALLA ELEM.=ALLTID,MAX_ANT_ITERATIONER=3,PRIMÄRAXEL=Y-AXEL,SEKUNDÄRAXEL=Z-AXEL,NOLLPUNKTSAXEL=X-AXEL
PRIMÄR=CIR_A1,CIR_A2,CIR_A3,,
SEKUNDÄR=CIR_A1,CIR_A2,,
NOLLPUNKT=CIR_A1,CIR_A2,,
UPPRIKTNING/****

The origin in the alignment should only be using one of the circles

Children

No Data