The CMM is traveling on it's own when the Enable button is pressed, I know on the old controllers you pressed 3 Buttons down to reset it and it would stop, what about these new controllers? I know there was a Topic on this along time ago, but I can't find it. Anyways what's the process with the new controllers?
If you have this style jogbox, there is a small board piggy-backed to the main board inside the case. If the jogbox gets dropped a few times, the small board can become dislodged from the main board. Take the box apart and make sure it is firmly connected. Adding a piece of rigid foam packing material can help wit this issue.
If you have this style jogbox, there is a small board piggy-backed to the main board inside the case. If the jogbox gets dropped a few times, the small board can become dislodged from the main board. Take the box apart and make sure it is firmly connected. Adding a piece of rigid foam packing material can help wit this issue.
