hexagon logo
Register Sign in
  • Replies 11 replies
  • Subscribers 221 subscribers
  • Views 129 views
  • Users 0 members are here
Options
Related

Not at the End

Flintstone
Good afternoon,

We are trying to do a linear open scan across a curved surface. When we click on generate, we can't get the path to meet up with the last "point". We are running PCDMIS 2021 on a global silver machine, with Renishaw probes.

Any suggestions?

Thanks.
Attached Files
Parents
  • Another thing you might want to check is that your point density is set high enough to cover start point to end point completely. These are our probe settings for all scans and for an inch length will give us approximately 150 points using the LSPX1H_T scanning sensor 

    OPTIONPROBE/MAXFORCE=0.096,LOWFORCE=0.019,UPPERFORCE=0.072,TRI GGERFORCE=0.063,
PROBEACCURACY=0.1,POSACCURACY=0.1,#RETURNDATA=10,
RETURNSPEED=0.4,SCANPNTDENSITY=6,
SCANACCELERATION=10,SCANOFFSETFORCE=0.06,
PROBINGMODE=DFL,MANFINEPROBING=NO
    ​
Reply
  • Another thing you might want to check is that your point density is set high enough to cover start point to end point completely. These are our probe settings for all scans and for an inch length will give us approximately 150 points using the LSPX1H_T scanning sensor 

    OPTIONPROBE/MAXFORCE=0.096,LOWFORCE=0.019,UPPERFORCE=0.072,TRI GGERFORCE=0.063,
PROBEACCURACY=0.1,POSACCURACY=0.1,#RETURNDATA=10,
RETURNSPEED=0.4,SCANPNTDENSITY=6,
SCANACCELERATION=10,SCANOFFSETFORCE=0.06,
PROBINGMODE=DFL,MANFINEPROBING=NO
    ​
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement