hexagon logo
Register Sign in
  • Replies 24 replies
  • Subscribers 221 subscribers
  • Views 232 views
  • Users 0 members are here
Options
Related

Datums are off inside programs (All out in same direction)

Smasherofprobes
Hello all,

I seem to be running into a problem with my 2way and 4way checks inside my programs. All of a sudden 2 fixtures in a row are showing an offset on my 4way and 2way 0.5mm in the same direction.
For Example I pick up the tooling balls come back check 2 way and 4way and both fixtures show they are out 0.5 mm in same direction (Machine axis). Does this make any sense ? could it be a bent probe that could be causing this issue ? I'm not sure whats going on here. Disappointed
Parents 
  • MTH1       =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<3150.06,650.02,900.01>,<0,-1,0>,12.7
            ACTL/<7480.993,626.807,19.103>,<0.000048,-0.9999999,-0.000384>,12.723
            TARG/<3150.06,650.02,900.01>,<0,-1,0>
            START ANG=0,END ANG=-360
            ANGLE VEC=<-1,0,0>
            DIRECTION=CW
            USE_PIN=NO
            REPORT VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=4,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=3,SPACER=4
              AVOIDANCE MOVE=BOTH,DISTANCE=400
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<3143.71,653.02,900.01>,<1,0,0>,<7474.634,628.477,19.198>
              HIT/BASIC,<3150.06,653.02,906.36>,<0,0,-1>,<7487.356,628.477,19.198>
              HIT/BASIC,<3156.41,653.02,900.01>,<-1,0,0>,<7477.017,628.477,24.071>
              HIT/BASIC,<3150.06,653.02,893.66>,<0,0,1>,<7486.241,628.478,22.69>
            ENDMEAS/
            TIP/T1A15B180, SHANKIJK=0, -0.966, 0.259, ANGLE=0
MTH2       =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<4550.055,650.02,900.01>,<0,-1,0>,12.7
            ACTL/<7477.772,626.825,-1380.928>,<0.0000656,-0.9999999,-0.0003837>,12.73
            TARG/<4550.055,650.02,900.01>,<0,-1,0>
            START ANG=0,END ANG=-360
            ANGLE VEC=<-1,0,0>
            DIRECTION=CW
            USE_PIN=NO
            REPORT VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=4,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=3,SPACER=4
              AVOIDANCE MOVE=BOTH,DISTANCE=400
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<4543.705,653.02,900.01>,<1,0,0>,<7471.418,628.295,-1381.202>
              HIT/BASIC,<4550.055,653.02,906.36>,<0,0,-1>,<7484.133,628.296,-1381.203>
              HIT/BASIC,<4556.405,653.02,900.01>,<-1,0,0>,<7480.146,628.296,-1386.826>
              HIT/BASIC,<4550.055,653.02,893.66>,<0,0,1>,<7473.743,628.285,-1385.858>
            ENDMEAS/
            TIP/T1A15B0, SHANKIJK=0, -0.966, -0.259, ANGLE=0
MPT1       =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<3750,650.02,185>,<0,-1,0>
            ACTL/<6766.657,626.841,-583.398>,<-0.0000371,-1,-0.0000122>
            TARG/<3750,650.02,185>,<0,-1,0>
            REPORT VEC=<0,-1,0>,UPDATE VEC=<0,-1,0>
            SHOW FEATURE PARAMETERS=YES
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=BOTH,DISTANCE=400
            SHOW HITS=YES
              HIT/BASIC,<6766.657,626.841,-583.398>,<-0.0000371,-1,-0.0000122>,<6766.657,626.841,-583.398>
            ENDMEAS/
MANUAL     =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/ITERATE
                PNT TARGET RAD=50,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
                MEAS ALL FEAT=NO,LEVEL AXIS=YAXIS,ROTATE AXIS=ZAXIS,ORIGIN AXIS=XAXIS
              LEVEL=MTH1,MTH2,MPT1,,
              ROTATE=MTH1,MTH2,,
              ORIGIN=MTH1,,
            ALIGNMENT/END
            MODE/DCC
            COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            Press 'ok' to begin DCC Mode
            ----------------------------
            MOVE/POINT,NORMAL,<3752.935,384.161,187.242>
TRYAGAIN   =LABEL/
            TIP/T1A15B0, SHANKIJK=0.259, -0.966, -0.001, ANGLE=-0.007
TH1        =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<3150.06,650.02,900.01>,<0,-1,0>,12.7
            ACTL/<3150.067,650.023,900.005>,<0.0003654,-0.9999999,-0.0000846>,12.723
            TARG/<3150.06,650.02,900.01>,<0,-1,0>
            START ANG=0,END ANG=180
            ANGLE VEC=<0,0,-1>
            DIRECTION=CW
            USE_PIN=NO
            REPORT VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              CIRCULAR MOVES=STRAIGHT
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=4,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=3,SPACER=6
              AVOIDANCE MOVE=BOTH,DISTANCE=250
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=NO
            TIP/T1A15B180, SHANKIJK=-0.259, -0.966, 0.001, ANGLE=0.007
TH2        =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<4550.055,650.02,900.01>,<0,-1,0>,12.7
            ACTL/<4550.094,650.018,900.004>,<-0.000264,-1,-0.000125>,12.72
            TARG/<4550.055,650.02,900.01>,<0,-1,0>
            START ANG=0,END ANG=180
            ANGLE VEC=<0,0,1>
            DIRECTION=CW
            USE_PIN=NO
            REPORT VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              CIRCULAR MOVES=STRAIGHT
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=4,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=3,SPACER=6
              AVOIDANCE MOVE=BOTH,DISTANCE=250
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<4550.277,653.02,906.356>,<-0.0348995,0,-0.9993908>,<4550.276,653.016,906.363>
              HIT/BASIC,<4555.591,653.02,903.121>,<-0.8717844,0,-0.4898897>,<4555.629,653.015,903.133>
              HIT/BASIC,<4555.591,653.02,896.899>,<-0.8717844,0,0.4898897>,<4555.632,653.015,896.869>
              HIT/BASIC,<4550.277,653.02,893.664>,<-0.0348995,0,0.9993908>,<4550.277,653.017,893.648>
            ENDMEAS/
DPT1       =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<3750,650.02,185>,<0,-1,0>
            ACTL/<3750.007,650.018,184.994>,<-0.0000034,-1,0.0000034>
            TARG/<3750,650.02,185>,<0,-1,0>
            SNAP=YES
            REPORT VEC=<0,-1,0>,UPDATE VEC=<0,-1,0>
            SHOW FEATURE PARAMETERS=YES
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=BOTH,DISTANCE=250
            SHOW HITS=YES
              HIT/BASIC,<3750.003,650.018,184.996>,<-0.0000034,-1,0.0000034>,<3750.003,650.018,184.996>
            ENDMEAS/
DCC        =ALIGNMENT/START,RECALL:MANUAL,LIST=YES
              ALIGNMENT/ITERATE
                PNT TARGET RAD=2,START LABEL=TRYAGAIN,FIXTURE TOL=0.025,ERROR LABEL=TRYAGAIN
                MEAS ALL FEAT=ALWAYS,MAX ITERATIONS=5,LEVEL AXIS=YAXIS,ROTATE AXIS=ZAXIS,ORIGIN AXIS=XAXIS
              LEVEL=TH1,TH2,DPT1,,
              ROTATE=TH1,TH2,,
              ORIGIN=TH1,,
            ALIGNMENT/END​
Reply 
  • MTH1       =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<3150.06,650.02,900.01>,<0,-1,0>,12.7
            ACTL/<7480.993,626.807,19.103>,<0.000048,-0.9999999,-0.000384>,12.723
            TARG/<3150.06,650.02,900.01>,<0,-1,0>
            START ANG=0,END ANG=-360
            ANGLE VEC=<-1,0,0>
            DIRECTION=CW
            USE_PIN=NO
            REPORT VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=4,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=3,SPACER=4
              AVOIDANCE MOVE=BOTH,DISTANCE=400
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<3143.71,653.02,900.01>,<1,0,0>,<7474.634,628.477,19.198>
              HIT/BASIC,<3150.06,653.02,906.36>,<0,0,-1>,<7487.356,628.477,19.198>
              HIT/BASIC,<3156.41,653.02,900.01>,<-1,0,0>,<7477.017,628.477,24.071>
              HIT/BASIC,<3150.06,653.02,893.66>,<0,0,1>,<7486.241,628.478,22.69>
            ENDMEAS/
            TIP/T1A15B180, SHANKIJK=0, -0.966, 0.259, ANGLE=0
MTH2       =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<4550.055,650.02,900.01>,<0,-1,0>,12.7
            ACTL/<7477.772,626.825,-1380.928>,<0.0000656,-0.9999999,-0.0003837>,12.73
            TARG/<4550.055,650.02,900.01>,<0,-1,0>
            START ANG=0,END ANG=-360
            ANGLE VEC=<-1,0,0>
            DIRECTION=CW
            USE_PIN=NO
            REPORT VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=4,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=3,SPACER=4
              AVOIDANCE MOVE=BOTH,DISTANCE=400
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<4543.705,653.02,900.01>,<1,0,0>,<7471.418,628.295,-1381.202>
              HIT/BASIC,<4550.055,653.02,906.36>,<0,0,-1>,<7484.133,628.296,-1381.203>
              HIT/BASIC,<4556.405,653.02,900.01>,<-1,0,0>,<7480.146,628.296,-1386.826>
              HIT/BASIC,<4550.055,653.02,893.66>,<0,0,1>,<7473.743,628.285,-1385.858>
            ENDMEAS/
            TIP/T1A15B0, SHANKIJK=0, -0.966, -0.259, ANGLE=0
MPT1       =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<3750,650.02,185>,<0,-1,0>
            ACTL/<6766.657,626.841,-583.398>,<-0.0000371,-1,-0.0000122>
            TARG/<3750,650.02,185>,<0,-1,0>
            REPORT VEC=<0,-1,0>,UPDATE VEC=<0,-1,0>
            SHOW FEATURE PARAMETERS=YES
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=BOTH,DISTANCE=400
            SHOW HITS=YES
              HIT/BASIC,<6766.657,626.841,-583.398>,<-0.0000371,-1,-0.0000122>,<6766.657,626.841,-583.398>
            ENDMEAS/
MANUAL     =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/ITERATE
                PNT TARGET RAD=50,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
                MEAS ALL FEAT=NO,LEVEL AXIS=YAXIS,ROTATE AXIS=ZAXIS,ORIGIN AXIS=XAXIS
              LEVEL=MTH1,MTH2,MPT1,,
              ROTATE=MTH1,MTH2,,
              ORIGIN=MTH1,,
            ALIGNMENT/END
            MODE/DCC
            COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            Press 'ok' to begin DCC Mode
            ----------------------------
            MOVE/POINT,NORMAL,<3752.935,384.161,187.242>
TRYAGAIN   =LABEL/
            TIP/T1A15B0, SHANKIJK=0.259, -0.966, -0.001, ANGLE=-0.007
TH1        =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<3150.06,650.02,900.01>,<0,-1,0>,12.7
            ACTL/<3150.067,650.023,900.005>,<0.0003654,-0.9999999,-0.0000846>,12.723
            TARG/<3150.06,650.02,900.01>,<0,-1,0>
            START ANG=0,END ANG=180
            ANGLE VEC=<0,0,-1>
            DIRECTION=CW
            USE_PIN=NO
            REPORT VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              CIRCULAR MOVES=STRAIGHT
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=4,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=3,SPACER=6
              AVOIDANCE MOVE=BOTH,DISTANCE=250
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=NO
            TIP/T1A15B180, SHANKIJK=-0.259, -0.966, 0.001, ANGLE=0.007
TH2        =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<4550.055,650.02,900.01>,<0,-1,0>,12.7
            ACTL/<4550.094,650.018,900.004>,<-0.000264,-1,-0.000125>,12.72
            TARG/<4550.055,650.02,900.01>,<0,-1,0>
            START ANG=0,END ANG=180
            ANGLE VEC=<0,0,1>
            DIRECTION=CW
            USE_PIN=NO
            REPORT VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              CIRCULAR MOVES=STRAIGHT
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=4,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=3,SPACER=6
              AVOIDANCE MOVE=BOTH,DISTANCE=250
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<4550.277,653.02,906.356>,<-0.0348995,0,-0.9993908>,<4550.276,653.016,906.363>
              HIT/BASIC,<4555.591,653.02,903.121>,<-0.8717844,0,-0.4898897>,<4555.629,653.015,903.133>
              HIT/BASIC,<4555.591,653.02,896.899>,<-0.8717844,0,0.4898897>,<4555.632,653.015,896.869>
              HIT/BASIC,<4550.277,653.02,893.664>,<-0.0348995,0,0.9993908>,<4550.277,653.017,893.648>
            ENDMEAS/
DPT1       =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<3750,650.02,185>,<0,-1,0>
            ACTL/<3750.007,650.018,184.994>,<-0.0000034,-1,0.0000034>
            TARG/<3750,650.02,185>,<0,-1,0>
            SNAP=YES
            REPORT VEC=<0,-1,0>,UPDATE VEC=<0,-1,0>
            SHOW FEATURE PARAMETERS=YES
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=BOTH,DISTANCE=250
            SHOW HITS=YES
              HIT/BASIC,<3750.003,650.018,184.996>,<-0.0000034,-1,0.0000034>,<3750.003,650.018,184.996>
            ENDMEAS/
DCC        =ALIGNMENT/START,RECALL:MANUAL,LIST=YES
              ALIGNMENT/ITERATE
                PNT TARGET RAD=2,START LABEL=TRYAGAIN,FIXTURE TOL=0.025,ERROR LABEL=TRYAGAIN
                MEAS ALL FEAT=ALWAYS,MAX ITERATIONS=5,LEVEL AXIS=YAXIS,ROTATE AXIS=ZAXIS,ORIGIN AXIS=XAXIS
              LEVEL=TH1,TH2,DPT1,,
              ROTATE=TH1,TH2,,
              ORIGIN=TH1,,
            ALIGNMENT/END​
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement