https://downloads.ms.hexagonmi.com/PC-DMIS-Versions/Release/2022.1/SP6/x64
Release Notes - 2022.1 SP6
********************************
Application Errors
********************************
You no longer get application errors:
• When you close measurement routines that contain pointcloud and loop commands.
See PCD-233344.
• When you right-click and drag commands in Summary mode. See PCD-237608.
********************************
Auto Features
********************************
• You can now see improved accuracy of directly measured laser auto features.
This ensures the integrity of the internal pointcloud data on multiple executions of
measurement routines. See PCD-229715.
• PC-DMIS now updates the actual values in the laser auto feature commands when
you click the Test button in the Auto Feature dialog box. See PCD-238320.
********************************
Constructed Features
********************************
• PC-DMIS no longer needs to reset IDs when you switch from constructed to
extracted features. See PCD-220873.
********************************
GD&T Dimensions
********************************
• PC-DMIS now shows the correct Geometric Tolerance CAD graphic textual data for
extracted cylinder features. See PCD-238290.
********************************
Graphic Display Window
********************************
• You can now see that PC-DMIS displays the Line Profile in the Graphic Display
window for geometric tolerance commands that have less than four points. See
PCD-227204.
********************************
Laser
********************************
• PC-DMIS no longer resets the features in the alignment when you use laser auto
features in a measurement routine and you need more than one scan pass to
complete the features. See PCD-234398.
• You can now see the correct scan direction for a rotary scan with the HP-OW
sensor. See PCD-236468.
• You can now access the laser rotation matrix through automation. See
PCD-238249.
********************************
Laser Feature Extraction
********************************
• PC-DMIS no longer offsets the previous surface that you selected before you mark
the CAD Offset check box in the Auto Feature dialog box. See PCD-235985.
********************************
Measurement Strategy Editor
********************************
• PC-DMIS can now save smart parameter feature values immediately when you edit
the values in the Measurement Strategy Editor dialog box. See PCD-238582.
********************************
Pointcloud
********************************
• PC-DMIS now has improved execution time when you run measurement routines
that execute pointcloud or CAD alignment commands multiple times. See
PCD-237471.
*******
************************************************** *******
Probes
• PC-DMIS now correctly performs ring light migration for vision auto features. See
PCD-233752.
• PC-DMIS now makes the correct probe and tip selection when you create a new
measurement routine and click Cancel in the Temperature Compensation dialog
box. See PCD-234486.
********************************
Reporting
********************************
• PC-DMIS now contains the correct ASME rules in
the TEXTONLY_Header_Every_Page.RTP, TEXTONLY_TRACKER.RTP,
TEXTANDCAD_TRACKER.RTP, and TEXTONLY_ISO8015.RTP report templates.
See PCD-221596.
• PC-DMIS now updates the tracefield information in the header of the custom report
when you execute a measurement routine in Protected or Operator mode. See
PCD-225889.
• PC-DMIS now displays the leader line arrows in the correct direction and the angle
of leader lines correctly in CAD reports. See PCD-230814.
********************************
Settings Editor
********************************
• PC-DMIS now added the CheckCAxisEnabled setting under the FDC and
FDC(CMM2) sections in the Settings Editor with a default value of False. When
this entry is set to TRUE, PC-DMIS performs an additional check to verify if the C
axis is enabled prior to a command that involves the C axis. See PCD-236355.