hexagon logo
Register Sign in
  • Replies 9 replies
  • Subscribers 222 subscribers
  • Views 110 views
  • Users 0 members are here
Options
Related

Alignment Help

Jegley
Do I need to physically perform an alignment before programming the rest of the moves? I assume not but I cant figure out how to get around this.

What I've done is programmed all of the features. First a cylinder and plane (for alignment) in manual mode, and the rest of the features dcc mode. When I hit execute I first manually measure the cylinder and plane, then dcc takes over and tries hitting off in space. It seems like its using the pre-programmed coordinates for hits rather than adjusting the dcc hits based on the alignment.

​
Parents
  • in reply to bfire85
    below is the code for the alignment and first two features


    STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
    ALIGNMENT/END
    MODE/MANUAL
    FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
    LOADPROBE/HP-TM-SF
    TIP/T1A0B0, SHANKIJK=0, -1, 0, ANGLE=0
    CYL1 =FEAT/CYLINDER,CARTESIAN,OUT,LEAST_SQR
    THEO/<0,5.21652,0>,<0,1,0>,1.5005,1.39781
    ACTL/<5.3017,5.49178,-14.46039>,<-0.022101,0.9960705,-0.0857624>,1.50064,1.31295
    MEAS/CYLINDER,6
    HIT/BASIC,NORMAL,<0.62879,4.57811,0.40927>,<0.8381035,0,0.5455112>,<5.98615,4.96956,-14.08055>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<-0.04827,4.51761,0.7487>,<-0.0643375,0,0.9979282>,<5.24166,4.96909,-13.66588>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<-0.67314,4.53435,0.3313>,<-0.8972201,0,0.4415836>,<4.66014,4.85465,-14.04037>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<-0.69914,5.83089,0.27217>,<-0.9318786,0,0.3627704>,<4.66996,5.93832,-14.07837>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<-0.05682,5.83077,0.7481>,<-0.0757293,0,0.9971284>,<5.25137,6.02607,-13.75435>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<0.662,5.91542,0.35303>,<0.8823751,0,0.4705466>,<5.9543,6.1898,-14.17614>,USE THEO=YES
    ENDMEAS/
    PLN1 =FEAT/PLANE,CARTESIAN,TRIANGLE
    THEO/<-0.05809,0,0.51964>,<0,-1,0>
    ACTL/<5.3769,0.27194,-13.46118>,<0.0223856,-0.9960619,0.0857876>
    MEAS/PLANE,3
    HIT/BASIC,NORMAL,<0.51434,0,0.48791>,<0,-1,0>,<5.99959,0.28214,-13.50528>,USE THEO=YES
    HIT/BASIC,NORMAL,<-0.05682,0,0.68813>,<0,-1,0>,<5.40966,0.28901,-13.27156>,USE THEO=YES
    HIT/BASIC,NORMAL,<-0.63179,0,0.38288>,<0,-1,0>,<4.72146,0.24468,-13.6067>,USE THEO=YES
    ENDMEAS/
    MODE/DCC
    A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
    ALIGNMENT/TRANS,XAXIS,CYL1
    ALIGNMENT/TRANS,ZAXIS,CYL1
    ALIGNMENT/LEVEL,YMINUS,PLN1
    ALIGNMENT/TRANS,YAXIS,PLN1
    ALIGNMENT/END
    END PLANE =FEAT/PLANE,CARTESIAN,TRIANGLE
    THEO/<-0.01201,-1.242,0.0678>,<0,-1,0>
    ACTL/<-5.33864,-1.2375,14.41287>,<-0.0019209,-0.0857876,0.9963116>
    MEAS/PLANE,3
    MOVE/POINT,NORMAL,<0.39437,10.67155,14.3923>
    HIT/BASIC,NORMAL,<-0.25554,-1.242,-0.01144>,<0,-1,0>,<-5.58388,-1.31099,14.40607>,USE THEO=YES
    HIT/BASIC,NORMAL,<-0.02078,-1.242,0.2397>,<0,-1,0>,<-5.34357,-1.06609,14.42762>,USE THEO=YES
    HIT/BASIC,NORMAL,<0.24028,-1.242,-0.02485>,<0,-1,0>,<-5.08848,-1.33544,14.40492>,USE THEO=YES
    ENDMEAS/
    27 SPLINE FACE=FEAT/PLANE,CARTESIAN,TRIANGLE
    THEO/<-0.03469,0,0.42357>,<0,-1,0>
    ACTL/<-5.35099,-0.77608,13.20598>,<-0.0019209,-0.0857876,0.9963116>
    MEAS/PLANE,3
    MOVE/POINT,NORMAL,<-0.10363,11.597,14.16869>
    HIT/BASIC,NORMAL,<-0.72616,0,0.24911>,<0,-1,0>,<-6.04618,-0.93437,13.19101>,USE THEO=YES
    HIT/BASIC,NORMAL,<-0.06624,0,0.74098>,<0,-1,0>,<-5.37546,-0.45921,13.23322>,USE THEO=YES
    HIT/BASIC,NORMAL,<0.68833,0,0.28063>,<0,-1,0>,<-4.63134,-0.93464,13.19372>,USE THEO=YES
    ENDMEAS/
    MODE/MANUAL
Reply
  • in reply to bfire85
    below is the code for the alignment and first two features


    STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
    ALIGNMENT/END
    MODE/MANUAL
    FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
    LOADPROBE/HP-TM-SF
    TIP/T1A0B0, SHANKIJK=0, -1, 0, ANGLE=0
    CYL1 =FEAT/CYLINDER,CARTESIAN,OUT,LEAST_SQR
    THEO/<0,5.21652,0>,<0,1,0>,1.5005,1.39781
    ACTL/<5.3017,5.49178,-14.46039>,<-0.022101,0.9960705,-0.0857624>,1.50064,1.31295
    MEAS/CYLINDER,6
    HIT/BASIC,NORMAL,<0.62879,4.57811,0.40927>,<0.8381035,0,0.5455112>,<5.98615,4.96956,-14.08055>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<-0.04827,4.51761,0.7487>,<-0.0643375,0,0.9979282>,<5.24166,4.96909,-13.66588>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<-0.67314,4.53435,0.3313>,<-0.8972201,0,0.4415836>,<4.66014,4.85465,-14.04037>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<-0.69914,5.83089,0.27217>,<-0.9318786,0,0.3627704>,<4.66996,5.93832,-14.07837>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<-0.05682,5.83077,0.7481>,<-0.0757293,0,0.9971284>,<5.25137,6.02607,-13.75435>,USE THEO=YES
    MOVE/CIRCULAR
    HIT/BASIC,NORMAL,<0.662,5.91542,0.35303>,<0.8823751,0,0.4705466>,<5.9543,6.1898,-14.17614>,USE THEO=YES
    ENDMEAS/
    PLN1 =FEAT/PLANE,CARTESIAN,TRIANGLE
    THEO/<-0.05809,0,0.51964>,<0,-1,0>
    ACTL/<5.3769,0.27194,-13.46118>,<0.0223856,-0.9960619,0.0857876>
    MEAS/PLANE,3
    HIT/BASIC,NORMAL,<0.51434,0,0.48791>,<0,-1,0>,<5.99959,0.28214,-13.50528>,USE THEO=YES
    HIT/BASIC,NORMAL,<-0.05682,0,0.68813>,<0,-1,0>,<5.40966,0.28901,-13.27156>,USE THEO=YES
    HIT/BASIC,NORMAL,<-0.63179,0,0.38288>,<0,-1,0>,<4.72146,0.24468,-13.6067>,USE THEO=YES
    ENDMEAS/
    MODE/DCC
    A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
    ALIGNMENT/TRANS,XAXIS,CYL1
    ALIGNMENT/TRANS,ZAXIS,CYL1
    ALIGNMENT/LEVEL,YMINUS,PLN1
    ALIGNMENT/TRANS,YAXIS,PLN1
    ALIGNMENT/END
    END PLANE =FEAT/PLANE,CARTESIAN,TRIANGLE
    THEO/<-0.01201,-1.242,0.0678>,<0,-1,0>
    ACTL/<-5.33864,-1.2375,14.41287>,<-0.0019209,-0.0857876,0.9963116>
    MEAS/PLANE,3
    MOVE/POINT,NORMAL,<0.39437,10.67155,14.3923>
    HIT/BASIC,NORMAL,<-0.25554,-1.242,-0.01144>,<0,-1,0>,<-5.58388,-1.31099,14.40607>,USE THEO=YES
    HIT/BASIC,NORMAL,<-0.02078,-1.242,0.2397>,<0,-1,0>,<-5.34357,-1.06609,14.42762>,USE THEO=YES
    HIT/BASIC,NORMAL,<0.24028,-1.242,-0.02485>,<0,-1,0>,<-5.08848,-1.33544,14.40492>,USE THEO=YES
    ENDMEAS/
    27 SPLINE FACE=FEAT/PLANE,CARTESIAN,TRIANGLE
    THEO/<-0.03469,0,0.42357>,<0,-1,0>
    ACTL/<-5.35099,-0.77608,13.20598>,<-0.0019209,-0.0857876,0.9963116>
    MEAS/PLANE,3
    MOVE/POINT,NORMAL,<-0.10363,11.597,14.16869>
    HIT/BASIC,NORMAL,<-0.72616,0,0.24911>,<0,-1,0>,<-6.04618,-0.93437,13.19101>,USE THEO=YES
    HIT/BASIC,NORMAL,<-0.06624,0,0.74098>,<0,-1,0>,<-5.37546,-0.45921,13.23322>,USE THEO=YES
    HIT/BASIC,NORMAL,<0.68833,0,0.28063>,<0,-1,0>,<-4.63134,-0.93464,13.19372>,USE THEO=YES
    ENDMEAS/
    MODE/MANUAL
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement