hexagon logo
Register Sign in
  • Replies 4 replies
  • Subscribers 221 subscribers
  • Views 73 views
  • Users 0 members are here
Options
Related

PC-Dmis True Position nominals not correct

RRayburn
2021 SP1
When I create a True Position dimension for a constructed cylinder (31_post), the X, Y, Z nominals to the refenced datum cylinder are not correct.
I noticed that the alignment system of the referenced cylinder (28_post) do not match the current program alignment (see attached image)
All features were created under the current program alignment.
How do I make the cylinder alignment match the current program alignment so the nominals show correctly?
​
Attached Files
Parents
  • What I need to report in the TP is the Y Z of the 31_post feature to the datum F feature, not to the current alignment.
    When the display coordinates is set to datum reference frame, the reported nominals are not even close to correct.
    I thought this was because the alignment system of the datum F cylinder (Y and Z directions) is not oriented that same way as the current alignment system.
Reply
  • What I need to report in the TP is the Y Z of the 31_post feature to the datum F feature, not to the current alignment.
    When the display coordinates is set to datum reference frame, the reported nominals are not even close to correct.
    I thought this was because the alignment system of the datum F cylinder (Y and Z directions) is not oriented that same way as the current alignment system.
Children
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement