Metrology Software Distribution - /PC-DMIS-Versions/Release/2022.2/SP3/x64> (hexagonmi.com)
Release Notes 2022.2 SP3
*****************************
Auto Features
*****************************
• PC-DMIS now updates the actual values in the laser auto feature commands when
you click the Test button in the Auto Feature dialog box. See PCD-238320.
• You can now execute existing measurement routines that use avoidance moves on
Auto Features in PC-DMIS versions 2022.2 and later. See PCD-239746.
• The Auto Feature dialog box now shows the correct target type when you edit a
feature for the first time after you open a measurement routine. See PCD-239769.
• You can now change a Vision feature's target type in the Edit window. See
PCD-240100.
*****************************
CAD
*****************************
• PC-DMIS now correctly imports an EDGECAM file (.ip) and displays it in the
Graphic Display window when your measurement routine contains a distance
command. See PCD-238671.
*****************************
Constructed Features
*****************************
• PC-DMIS now correctly creates the construction of a 3D Width feature from the
Construct Width dialog box. See PCD-226503.
• PC-DMIS now evaluates the Auto Laser Edge Point and the Constructed Extracted
Edge Point features correctly when the indent and spacer values are equal. See
PCD-226849.
• PC-DMIS now draws constructed extracted features and their IDs in the Graphic
Display window when you create those features. See PCD-232064.
• You can now execute a measurement routine that contains the CONSTR/
SLOT,SQUARE,CAST commands. See PCD-239055.
• PC-DMIS now displays the correct method in the Construct Feature dialog box
when you press F9 on the construct feature command in the Edit window. See
PCD-240182.
*****************************
GD&T Dimensions
*****************************
• PC-DMIS now shows the correct Geometric Tolerance CAD graphic textual data for
extracted cylinder features. See PCD-238290.
• You can now see that XACT Measure migration works correctly when you use
internal features, such as Auto feature adaptive measurement strategies, as input
features. See PCD-239247.
• You can now see that no change occurs to the legacy profile values for Line, Circle,
and Plane features when you select the laser probe type but you do not use a laser
probe to measure the features. See PCD-239960.
*****************************
Laser
*****************************
• PC-DMIS no longer resets the features in the alignment when you use laser auto
features in a measurement routine and you need more than one scan pass to
complete the features. See PCD-234398.
• You can now see the correct scan direction for a rotary scan with the HP-OW
sensor. See PCD-236468.
• PC-DMIS now creates laser scan commands correctly when you import DMIS files
with the HP-L-10.10 sensor. Also, PC-DMIS now correctly translates the acceptance
angle filter values. See PCD-239053.
*****************************
Measurement Strategy Editor
*****************************
• PC-DMIS can now save smart parameter feature values immediately when you edit
the values in the Measurement Strategy Editor dialog box. See PCD-238582.
*****************************
Pointcloud
*****************************
• PC-DMIS now allows the COP filter to use expressions that update during the
execution of a measurement routine. See PCD-226707.
• You can now create multiple COP operator commands without having to re-select
the reference COP in the Pointcloud Operator dialog box. See PCD-234458.
• PC-DMIS no longer loses the COP color that you set when you change the
Operator type in the Pointcloud Operator dialog box. See PCD-239202.
*****************************
Reporting
*****************************
• PC-DMIS now contains the correct ASME rules in
the TEXTONLY_Header_Every_Page.RTP, TEXTONLY_TRACKER.RTP,
TEXTANDCAD_TRACKER.RTP, and TEXTONLY_ISO8015.RTP report templates.
See PCD-221596.
• PC-DMIS now updates the tracefield information in the header of the custom report
when you execute a measurement routine in Protected or Operator mode. See
PCD-225889.
• You can now see the Dimension Outside Limits for the ASME Size, ISO Size, ASME
Tolerance, and ISO Tolerance commands. See PCD-232428.