Metrology Software Distribution - /PC-DMIS-Versions/Release/2021.2/SP10/x64> (hexagonmi.com)
Release Notes - 2021.2 SP10
**********************************
Application Error
**********************************
• You no longer get an application error when you close measurement routines that
contain pointcloud and loop commands. See PCD-233344.
**********************************
Auto Features
**********************************
• PC-DMIS no longer offsets the previous surface that you selected before you mark
the CAD Offset check box in the Auto Feature dialog box. See PCD-235985.
• PC-DMIS now updates the actual values in the laser auto feature commands when
you click the Test button in the Auto Feature dialog box. See PCD-238320.
• The Auto Feature dialog box now shows the correct target type when you edit a
feature for the first time after you open a measurement routine. See PCD-239769.
• You can now change a Vision feature's target type in the Edit window. See
PCD-240100.
**********************************
Constructed Features
**********************************
• PC-DMIS now correctly creates the construction of a 3D Width feature from the
Construct Width dialog box. See PCD-226503.
• PC-DMIS now evaluates the Auto Laser Edge Point and the Constructed Extracted
Edge Point features correctly when the indent and spacer values are equal. See
PCD-226849.
GD&T Dimensions
**********************************
• You can now see that no change occurs to the legacy profile values for Line, Circle,
and Plane features when you select the laser probe type but you do not use a laser
probe to measure the features. See PCD-239960.
**********************************
Laser
**********************************
• PC-DMIS no longer resets the features in the alignment when you use laser auto
features in a measurement routine and you need more than one scan pass to
complete the features. See PCD-234398.
• You can now see the correct scan direction for a rotary scan with the HP-OW
sensor. See PCD-236468.
**********************************
Pointcloud
**********************************
• You can now create multiple COP operator commands without having to re-select
the reference COP in the Pointcloud Operator dialog box. See PCD-234458.
• PC-DMIS now has improved execution time when you run measurement routines
that execute pointcloud or CAD alignment commands multiple times. See
PCD-237471.
• PC-DMIS no longer loses the COP color that you set when you change the
Operator type in the Pointcloud Operator dialog box. See PCD-239202.
**********************************
Probes
**********************************
• PC-DMIS now correctly performs ring light migration for vision auto features. See
PCD-233752.
• PC-DMIS now makes the correct probe and tip selection when you create a new
measurement routine and click Cancel in the Temperature Compensation dialog
box. See PCD-234486.
**********************************
Reporting
**********************************
• PC-DMIS now contains the correct ASME rules in
the TEXTONLY_Header_Every_Page.RTP, TEXTONLY_TRACKER.RTP,
TEXTANDCAD_TRACKER.RTP, and TEXTONLY_ISO8015.RTP report templates.
See PCD-221596.
• PC-DMIS now updates the tracefield information in the header of the custom report
when you execute a measurement routine in Protected or Operator mode. See
PCD-225889.
• PC-DMIS now updates the PDF report correctly when your measurement routine
contains the Simultaneous Evaluation command for the Geometric Tolerance label.
See PCD-240428.
**********************************
SFx
**********************************
• PC-DMIS now properly sends your exported files to the SFx Desktop by copying
them first to the user temp folder location. See PCD-239951.
**********************************
Vision
**********************************
• You can now see that the Vision Min/Max edge point's left, right, and bottom
handles size the target properly in PC-DMIS. See PCD-239916.