I'm not sure if someone on another shift has possible turned something on but when I came in today, everytime I execute a feature using ctrl U/Q at the end I get the printing prompt below. Printing is turned off under File>Printing>Report Window Print Setup. We typically just produce .rtf and .dmo and rarely use pdf. Any idea how I can turn this off? 2022R1 is what we're using if that matters.
So to update, I went into settings editor and Amyuni is set to 0. Also under save/print report its now set to PC-DMIS 50 Converter. With printing turned off, I'm still getting the PCDLRN pop up every time it executes a feature/features using CTRL U/Q or I cancel.
Uninstall and reinstall the PDF drivers.
Located in: C:\Program Files\Hexagon\PC-DMIS {Your Version}\PDFDriverInstallFiles
PCDMIS should not be loaded when performing the next 2 steps.
BatFileInstallPDF50.zip: contains the needed files
1) Removing the previous drivers
BatFileInstallPDF50.zip contains InstallPDF50.exe and UnInstallPDF.bat.
Unzip these files to a temporary location. Double click on the UnInstallPDF.bat file.
A dialog should be displayed saying the pdf driver is removed. This will remove other instances of the driver if they are present.
Close the dialog.
Close the COMMAND screen by pressing ENTER.
(added instruction) Reboot the Computer.
2) Installing the PDF Suite drivers
Unzip the BatFileInstallPDF50.zip files to the pcdmis directory.
There is also an UnInstallPDF.bat file which may be used in Step 1 above.
Double click on the InstallPDF50.BAT.
A dialog should be displayed saying the driver is being installed.
Close the dialog.
Close the COMMAND screen by pressing ENTER.
(added instruction) Reboot the Computer.
So to update, I went into settings editor and Amyuni is set to 0. Also under save/print report its now set to PC-DMIS 50 Converter. With printing turned off, I'm still getting the PCDLRN pop up every time it executes a feature/features using CTRL U/Q or I cancel.
Uninstall and reinstall the PDF drivers.
Located in: C:\Program Files\Hexagon\PC-DMIS {Your Version}\PDFDriverInstallFiles
PCDMIS should not be loaded when performing the next 2 steps.
BatFileInstallPDF50.zip: contains the needed files
1) Removing the previous drivers
BatFileInstallPDF50.zip contains InstallPDF50.exe and UnInstallPDF.bat.
Unzip these files to a temporary location. Double click on the UnInstallPDF.bat file.
A dialog should be displayed saying the pdf driver is removed. This will remove other instances of the driver if they are present.
Close the dialog.
Close the COMMAND screen by pressing ENTER.
(added instruction) Reboot the Computer.
2) Installing the PDF Suite drivers
Unzip the BatFileInstallPDF50.zip files to the pcdmis directory.
There is also an UnInstallPDF.bat file which may be used in Step 1 above.
Double click on the InstallPDF50.BAT.
A dialog should be displayed saying the driver is being installed.
Close the dialog.
Close the COMMAND screen by pressing ENTER.
(added instruction) Reboot the Computer.
