Already ?????
Metrology Software Distribution - /PC-DMIS-Versions/Release/2023.1/SP1/x64> (hexagonmi.com)
Release Notes - 2023.1 SP1
*************************************
Application Error
*************************************
• You no longer get an application error when you click Cancel in the Probe Utilities
dialog box. See PCD-241798.
*************************************
Calibration
*************************************
• PC-DMIS no longer displays errors when you use collision check on a probe
calibration ScanRDV for multiple tips. See PCD-237399.
*************************************
DMIS
*************************************
• You can now export DMO files for ISO tolerance commands. See PCD-241276.
*************************************
ESF (VWMP)
*************************************
• You can now edit dimension tolerances in the Edit window for ESF (VWMP)
features. See PCD-205720.
• PC-DMIS no longer displays an incorrect warning that references other features in a
measurement routine when you delete ESF (VWMP) contact features from the Edit
window. See PCD-241506.
*************************************
Legacy Dimensions
*************************************
• PC-DMIS now applies thickness correctly in dimension commands when you apply
actual thickness to auto plane features. See PCD-167531.
*************************************
Measurement Strategy Editor
*************************************
• PC-DMIS now correctly converts the Scan Speed and Acceleration values in the
Measurement Strategy Editor dialog box when a measurement routine is in inch
units. See PCD-235998.
• PC-DMIS now updates feature values after you apply smart parameters in the
Measurement Strategy Editor dialog box. See PCD-238583.
*************************************
Pointcloud
*************************************
• PC-DMIS now shows the Portable Scanning Widget toolbar when the current
probe is a laser probe. See PCD-241723.
*************************************
Portable
*************************************
• PC-DMIS now works correctly for the Auto Trigger plane with an auto line feature.
See PCD-228148.
*************************************
Temperature Compensation
*************************************
• You can now see the correct part temperature when you use manual temperature
compensation V1. See PCD-241294.
