PC-DMIS 2022.1. Part has fairly conventional alignment (datum A plane, datum B circle projected onto datum A, datum C line to another circle). Features on interest are holes in different orientations. 40-50% of holes' FCF true positions read "error" on report window, both for size and position. Features' actual values all populate, whether LSQ or max inscribed calculations are used. If I add legacy dimensions (with or without ASME-correct alignment), results populate fine.
My first inclination is that some combination of features is deemed "unacceptable" for use in GeoTol to the math in Y14.5.1-2019 which applies to the Y14.5-2009 standard.
You can align anything you want in an alignment, and you can dimension anything you want in Legacy.
GeoTol gives me issues with some things not being valid, like using a mid-point for a rotational datum spinning around a shaft for the keyway. I guess it wants me to make a mid plane, but keyways are not that big that I can effectively get two opposing planes.
My guess is this is what you are seeing, though why it is selective I couldn't tell you. It is new, could be buggy still, a bit.
You can not use a helix measured cylinder for position in GeoTol (2021.2 anyway) most of the time, once in a while it allows me to do it, so I just stopped using helices. Maybe some of your holes you scanned a helix while others you scanned (or probed) concentric circles?
That is the one thing I know won't fly, I'm sure there are others.
Makes helix scanning fairly useless, since I'm not going to scan a hole with circles to report the position then scan a helix to report the form and I doubt many other people will either.
