hexagon logo
Register Sign in
  • Replies 52 replies
  • Subscribers 222 subscribers
  • Views 604 views
  • Users 0 members are here
Options
Related

GEOTOL help

browningdmis
management had me run a test. I taped a 2,4,6 block to the table. took the top plane, x+ and y- and created my alignment. I then called them datum a top b x and c y. I measured 2 holes on each side and did a position in geotol. I used the same measured data in legacy and got a .010 difference. How can this be?

What management is saying is the position formula. 2 x (dx^2 + dy^2)^1/2 when you figure it manually using the measured values matches legacy perfectly but it is not matching in GEOTOL.

I understand this is rough and dirty test but I can not explain why parts we measure good with second methods and legacy are good. GEOTOL (which our customer uses and requires) is failing the part. I have asked Hexagon this question and keep being told that GEOTOL is correct to the standard. Which is great but the standard use the 2 x (dx^2 + dy^2)^1/2 formula and is passing this but failing in GEOTOL.

I am not bashing PCD Hexagon or anything but I can not explain it to management.

What am I missing??​
Parents
  • here is some of the code for the part they are machine as we speak. this a very very close to the part we had issues with. This part has not been ran on the cmm yet and was built offline.

    hit me hard. I really got to get what I am doing wrong figured out.

    STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
    ALIGNMENT/END
    MODE/MANUAL
    FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
    LOADPROBE/3X50
    TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
    MOVESPEED/ 100
    COMMENT/OPER,NO,FULL SCREEN=YES,AUTO-CONTINUE=NO,OVC=NO,
    RUN SLOW TILL PROOFED
    ADD SET UP PICTURE
    MAN_DATUM_B=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<-1.7053,-1.1342,0.375>,<0,0,1>
    ACTL/<-1.7053,-1.1342,0.375>,<0,0,1>
    TARG/<-1.7053,-1.1342,0.375>,<0,0,1>
    ANGLE VEC=<1,0,0>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=2,NUMROWS=2
    SPACER=0.3
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    MAN_DATUM_A=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<-2.6013,-1.5,-0.182>,<0,-1,0>
    ACTL/<-2.6013,-1.5,-0.182>,<0,-1,0>
    TARG/<-2.6013,-1.5,-0.182>,<0,-1,0>
    ANGLE VEC=<1,0,0>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=2,NUMROWS=2
    SPACER=0.3
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    MAN_C =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<-3,-0.4974,0.1834>,<-1,0,0>
    ACTL/<-3,-0.4974,0.1834>,<-1,0,0>
    TARG/<-3,-0.4974,0.1834>,<-1,0,0>
    ANGLE VEC=<0,0,1>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=2,NUMROWS=2
    SPACER=0.4
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    MAN_ALIG =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
    ALIGNMENT/LEVEL,ZPLUS,MAN_DATUM_B
    ALIGNMENT/TRANS,ZAXIS,MAN_DATUM_B
    ALIGNMENT/ROTATE,YMINUS,TO,MAN_DATUM_A,ABOUT,ZPLUS
    ALIGNMENT/TRANS,YAXIS,MAN_DATUM_A
    ALIGNMENT/TRANS,XAXIS,MAN_C
    ALIGNMENT/END
    MODE/DCC
    DCC_DATUM_B=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<1.6683,0.8577,0>,<0,0,1>
    ACTL/<1.6683,0.8577,0>,<0,0,1>
    TARG/<1.6683,0.8577,0>,<0,0,1>
    ANGLE VEC=<1,0,0>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SPACER=0.4
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    SHOW HITS=NO
    DCC_DATUM_A=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<1.7627,0,-0.8071>,<0,-1,0>
    ACTL/<1.7627,0,-0.8071>,<0,-1,0>
    TARG/<1.7627,0,-0.8071>,<0,-1,0>
    ANGLE VEC=<1,0,0>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SPACER=0.5
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    SHOW HITS=NO
    DCC_DATUM_C=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<0,2.7109,-0.5737>,<-1,0,0>
    ACTL/<0,2.7109,-0.5737>,<-1,0,0>
    TARG/<0,2.7109,-0.5737>,<-1,0,0>
    ANGLE VEC=<0,0,1>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SPACER=0.3
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    SHOW HITS=NO
    DCC_DATUM_C=ALIGNMENT/START,RECALL:STARTUP,LIST=YES
    ALIGNMENT/LEVEL,ZPLUS,DCC_DATUM_B
    ALIGNMENT/TRANS,ZAXIS,DCC_DATUM_B
    ALIGNMENT/ROTATE,YMINUS,TO,DCC_DATUM_A,ABOUT,ZPLUS
    ALIGNMENT/TRANS,YAXIS,DCC_DATUM_A
    ALIGNMENT/TRANS,XAXIS,DCC_DATUM_C
    ALIGNMENT/END
    DATUM_D =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.4807,1.475,-0.2275>,<0,0,1>,0.25,0.7075
    ACTL/<1.4807,1.475,-0.2275>,<0,0,1>,0.25,0.7075
    TARG/<1.4807,1.475,-0.2275>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMLEVELS=3,DEPTH=0.0589,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_55_1 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.4807,1.475,-0.1037>,<0,0,1>,0.341,-0.2025
    ACTL/<1.4807,1.475,-0.1037>,<0,0,1>,0.341,-0.2025
    TARG/<1.4807,1.475,-0.2275>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_55_2 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.95,1.475,-0.0837>,<0,0,1>,0.341,0.2025
    ACTL/<1.95,1.475,-0.0837>,<0,0,1>,0.341,0.2025
    TARG/<1.95,1.475,-0.025>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_57_1 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.95,1.475,-0.2275>,<0,0,1>,0.25,0.4075
    ACTL/<1.95,1.475,-0.2275>,<0,0,1>,0.25,0.4075
    TARG/<1.95,1.475,-0.2275>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_57.2 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.0114,1.475,-0.2275>,<0,0,1>,0.25,0.25
    ACTL/<1.0114,1.475,-0.2275>,<0,0,1>,0.25,0.25
    TARG/<1.0114,1.475,-0.2275>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_55_3 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.0114,1.475,-0.1037>,<0,0,1>,0.341,0.2025
    ACTL/<1.0114,1.475,-0.1037>,<0,0,1>,0.341,0.2025
    TARG/<1.0114,1.475,-0.025>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0787,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_29_1 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<0.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415
    ACTL/<0.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415
    TARG/<0.9807,0.725,-0.0285>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_29_2 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415
    ACTL/<1.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415
    TARG/<1.9807,0.725,-0.0285>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    DATDEF/A,FEATURES=DCC_DATUM_A,,
    DATDEF/B,FEATURES=DCC_DATUM_B,,
    DATDEF/C,FEATURES=DCC_DATUM_C,,
    DATDEF/D,FEATURES=DATUM_D,,
    DATDEF/E,FEATURES=BUB_70_DATUM_E,,​
Reply
  • here is some of the code for the part they are machine as we speak. this a very very close to the part we had issues with. This part has not been ran on the cmm yet and was built offline.

    hit me hard. I really got to get what I am doing wrong figured out.

    STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
    ALIGNMENT/END
    MODE/MANUAL
    FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
    LOADPROBE/3X50
    TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
    MOVESPEED/ 100
    COMMENT/OPER,NO,FULL SCREEN=YES,AUTO-CONTINUE=NO,OVC=NO,
    RUN SLOW TILL PROOFED
    ADD SET UP PICTURE
    MAN_DATUM_B=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<-1.7053,-1.1342,0.375>,<0,0,1>
    ACTL/<-1.7053,-1.1342,0.375>,<0,0,1>
    TARG/<-1.7053,-1.1342,0.375>,<0,0,1>
    ANGLE VEC=<1,0,0>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=2,NUMROWS=2
    SPACER=0.3
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    MAN_DATUM_A=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<-2.6013,-1.5,-0.182>,<0,-1,0>
    ACTL/<-2.6013,-1.5,-0.182>,<0,-1,0>
    TARG/<-2.6013,-1.5,-0.182>,<0,-1,0>
    ANGLE VEC=<1,0,0>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=2,NUMROWS=2
    SPACER=0.3
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    MAN_C =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<-3,-0.4974,0.1834>,<-1,0,0>
    ACTL/<-3,-0.4974,0.1834>,<-1,0,0>
    TARG/<-3,-0.4974,0.1834>,<-1,0,0>
    ANGLE VEC=<0,0,1>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=2,NUMROWS=2
    SPACER=0.4
    AVOIDANCE MOVE=NO
    SHOW HITS=NO
    MAN_ALIG =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
    ALIGNMENT/LEVEL,ZPLUS,MAN_DATUM_B
    ALIGNMENT/TRANS,ZAXIS,MAN_DATUM_B
    ALIGNMENT/ROTATE,YMINUS,TO,MAN_DATUM_A,ABOUT,ZPLUS
    ALIGNMENT/TRANS,YAXIS,MAN_DATUM_A
    ALIGNMENT/TRANS,XAXIS,MAN_C
    ALIGNMENT/END
    MODE/DCC
    DCC_DATUM_B=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<1.6683,0.8577,0>,<0,0,1>
    ACTL/<1.6683,0.8577,0>,<0,0,1>
    TARG/<1.6683,0.8577,0>,<0,0,1>
    ANGLE VEC=<1,0,0>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SPACER=0.4
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    SHOW HITS=NO
    DCC_DATUM_A=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<1.7627,0,-0.8071>,<0,-1,0>
    ACTL/<1.7627,0,-0.8071>,<0,-1,0>
    TARG/<1.7627,0,-0.8071>,<0,-1,0>
    ANGLE VEC=<1,0,0>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SPACER=0.5
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    SHOW HITS=NO
    DCC_DATUM_C=FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
    THEO/<0,2.7109,-0.5737>,<-1,0,0>
    ACTL/<0,2.7109,-0.5737>,<-1,0,0>
    TARG/<0,2.7109,-0.5737>,<-1,0,0>
    ANGLE VEC=<0,0,1>,SQUARE
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SPACER=0.3
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    SHOW HITS=NO
    DCC_DATUM_C=ALIGNMENT/START,RECALL:STARTUP,LIST=YES
    ALIGNMENT/LEVEL,ZPLUS,DCC_DATUM_B
    ALIGNMENT/TRANS,ZAXIS,DCC_DATUM_B
    ALIGNMENT/ROTATE,YMINUS,TO,DCC_DATUM_A,ABOUT,ZPLUS
    ALIGNMENT/TRANS,YAXIS,DCC_DATUM_A
    ALIGNMENT/TRANS,XAXIS,DCC_DATUM_C
    ALIGNMENT/END
    DATUM_D =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.4807,1.475,-0.2275>,<0,0,1>,0.25,0.7075
    ACTL/<1.4807,1.475,-0.2275>,<0,0,1>,0.25,0.7075
    TARG/<1.4807,1.475,-0.2275>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMLEVELS=3,DEPTH=0.0589,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_55_1 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.4807,1.475,-0.1037>,<0,0,1>,0.341,-0.2025
    ACTL/<1.4807,1.475,-0.1037>,<0,0,1>,0.341,-0.2025
    TARG/<1.4807,1.475,-0.2275>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_55_2 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.95,1.475,-0.0837>,<0,0,1>,0.341,0.2025
    ACTL/<1.95,1.475,-0.0837>,<0,0,1>,0.341,0.2025
    TARG/<1.95,1.475,-0.025>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_57_1 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.95,1.475,-0.2275>,<0,0,1>,0.25,0.4075
    ACTL/<1.95,1.475,-0.2275>,<0,0,1>,0.25,0.4075
    TARG/<1.95,1.475,-0.2275>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_57.2 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.0114,1.475,-0.2275>,<0,0,1>,0.25,0.25
    ACTL/<1.0114,1.475,-0.2275>,<0,0,1>,0.25,0.25
    TARG/<1.0114,1.475,-0.2275>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_55_3 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.0114,1.475,-0.1037>,<0,0,1>,0.341,0.2025
    ACTL/<1.0114,1.475,-0.1037>,<0,0,1>,0.341,0.2025
    TARG/<1.0114,1.475,-0.025>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0787,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_29_1 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<0.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415
    ACTL/<0.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415
    TARG/<0.9807,0.725,-0.0285>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    BUB_29_2 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
    THEO/<1.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415
    ACTL/<1.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415
    TARG/<1.9807,0.725,-0.0285>,<0,0,1>
    START ANG=0,END ANG=360
    ANGLE VEC=<1,0,0>
    DIRECTION=CCW
    SHOW FEATURE PARAMETERS=NO
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=3,NUMLEVELS=2,DEPTH=0.0587,END OFFSET=0.0787,PITCH=0
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=0
    AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=0.3937,DISTANCE AFTER=0.3937,DIRECTION=ALONG FEATURE VECTOR
    FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
    SHOW HITS=NO
    DATDEF/A,FEATURES=DCC_DATUM_A,,
    DATDEF/B,FEATURES=DCC_DATUM_B,,
    DATDEF/C,FEATURES=DCC_DATUM_C,,
    DATDEF/D,FEATURES=DATUM_D,,
    DATDEF/E,FEATURES=BUB_70_DATUM_E,,​
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement