Your Products have been synced, click here to refresh
startup =alignment/start,recall:use_part_setup,list=yes alignment/end mode/manual format/text,options, ,headings,symbols, ;nom,tol,meas,dev,outtol, , loadprobe/3x50 tip/t1a0b0, shankijk=0, 0, 1, angle=0 movespeed/ 100 comment/oper,no,full screen=yes,auto-continue=no,ovc=no, run slow till proofed add set up picture man_datum_b=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<-1.7053,-1.1342,0.375>,<0,0,1> actl/<-1.7053,-1.1342,0.375>,<0,0,1> targ/<-1.7053,-1.1342,0.375>,<0,0,1> angle vec=<1,0,0>,square show feature parameters=no show contact parameters=yes numhits=2,numrows=2 spacer=0.3 avoidance move=no show hits=no man_datum_a=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<-2.6013,-1.5,-0.182>,<0,-1,0> actl/<-2.6013,-1.5,-0.182>,<0,-1,0> targ/<-2.6013,-1.5,-0.182>,<0,-1,0> angle vec=<1,0,0>,square show feature parameters=no show contact parameters=yes numhits=2,numrows=2 spacer=0.3 avoidance move=no show hits=no man_c =feat/contact/plane/default,cartesian,triangle,least_sqr theo/<-3,-0.4974,0.1834>,<-1,0,0> actl/<-3,-0.4974,0.1834>,<-1,0,0> targ/<-3,-0.4974,0.1834>,<-1,0,0> angle vec=<0,0,1>,square show feature parameters=no show contact parameters=yes numhits=2,numrows=2 spacer=0.4 avoidance move=no show hits=no man_alig =alignment/start,recall:startup,list=yes alignment/level,zplus,man_datum_b alignment/trans,zaxis,man_datum_b alignment/rotate,yminus,to,man_datum_a,about,zplus alignment/trans,yaxis,man_datum_a alignment/trans,xaxis,man_c alignment/end mode/dcc dcc_datum_b=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<1.6683,0.8577,0>,<0,0,1> actl/<1.6683,0.8577,0>,<0,0,1> targ/<1.6683,0.8577,0>,<0,0,1> angle vec=<1,0,0>,square show feature parameters=no show contact parameters=yes numhits=5,numrows=2 spacer=0.4 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector show hits=no dcc_datum_a=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<1.7627,0,-0.8071>,<0,-1,0> actl/<1.7627,0,-0.8071>,<0,-1,0> targ/<1.7627,0,-0.8071>,<0,-1,0> angle vec=<1,0,0>,square show feature parameters=no show contact parameters=yes numhits=5,numrows=2 spacer=0.5 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector show hits=no dcc_datum_c=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<0,2.7109,-0.5737>,<-1,0,0> actl/<0,2.7109,-0.5737>,<-1,0,0> targ/<0,2.7109,-0.5737>,<-1,0,0> angle vec=<0,0,1>,square show feature parameters=no show contact parameters=yes numhits=5,numrows=2 spacer=0.3 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector show hits=no dcc_datum_c=alignment/start,recall:startup,list=yes alignment/level,zplus,dcc_datum_b alignment/trans,zaxis,dcc_datum_b alignment/rotate,yminus,to,dcc_datum_a,about,zplus alignment/trans,yaxis,dcc_datum_a alignment/trans,xaxis,dcc_datum_c alignment/end datum_d =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.4807,1.475,-0.2275>,<0,0,1>,0.25,0.7075 actl/<1.4807,1.475,-0.2275>,<0,0,1>,0.25,0.7075 targ/<1.4807,1.475,-0.2275>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=5,numlevels=3,depth=0.0589,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_55_1 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.4807,1.475,-0.1037>,<0,0,1>,0.341,-0.2025 actl/<1.4807,1.475,-0.1037>,<0,0,1>,0.341,-0.2025 targ/<1.4807,1.475,-0.2275>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_55_2 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.95,1.475,-0.0837>,<0,0,1>,0.341,0.2025 actl/<1.95,1.475,-0.0837>,<0,0,1>,0.341,0.2025 targ/<1.95,1.475,-0.025>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_57_1 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.95,1.475,-0.2275>,<0,0,1>,0.25,0.4075 actl/<1.95,1.475,-0.2275>,<0,0,1>,0.25,0.4075 targ/<1.95,1.475,-0.2275>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_57.2 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.0114,1.475,-0.2275>,<0,0,1>,0.25,0.25 actl/<1.0114,1.475,-0.2275>,<0,0,1>,0.25,0.25 targ/<1.0114,1.475,-0.2275>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_55_3 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.0114,1.475,-0.1037>,<0,0,1>,0.341,0.2025 actl/<1.0114,1.475,-0.1037>,<0,0,1>,0.341,0.2025 targ/<1.0114,1.475,-0.025>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0787,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_29_1 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<0.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415 actl/<0.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415 targ/<0.9807,0.725,-0.0285>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_29_2 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415 actl/<1.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415 targ/<1.9807,0.725,-0.0285>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no datdef/a,features=dcc_datum_a,, datdef/b,features=dcc_datum_b,, datdef/c,features=dcc_datum_c,, datdef/d,features=datum_d,, datdef/e,features=bub_70_datum_e,,
startup =alignment/start,recall:use_part_setup,list=yes alignment/end mode/manual format/text,options, ,headings,symbols, ;nom,tol,meas,dev,outtol, , loadprobe/3x50 tip/t1a0b0, shankijk=0, 0, 1, angle=0 movespeed/ 100 comment/oper,no,full screen=yes,auto-continue=no,ovc=no, run slow till proofed add set up picture man_datum_b=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<-1.7053,-1.1342,0.375>,<0,0,1> actl/<-1.7053,-1.1342,0.375>,<0,0,1> targ/<-1.7053,-1.1342,0.375>,<0,0,1> angle vec=<1,0,0>,square show feature parameters=no show contact parameters=yes numhits=2,numrows=2 spacer=0.3 avoidance move=no show hits=no man_datum_a=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<-2.6013,-1.5,-0.182>,<0,-1,0> actl/<-2.6013,-1.5,-0.182>,<0,-1,0> targ/<-2.6013,-1.5,-0.182>,<0,-1,0> angle vec=<1,0,0>,square show feature parameters=no show contact parameters=yes numhits=2,numrows=2 spacer=0.3 avoidance move=no show hits=no man_c =feat/contact/plane/default,cartesian,triangle,least_sqr theo/<-3,-0.4974,0.1834>,<-1,0,0> actl/<-3,-0.4974,0.1834>,<-1,0,0> targ/<-3,-0.4974,0.1834>,<-1,0,0> angle vec=<0,0,1>,square show feature parameters=no show contact parameters=yes numhits=2,numrows=2 spacer=0.4 avoidance move=no show hits=no man_alig =alignment/start,recall:startup,list=yes alignment/level,zplus,man_datum_b alignment/trans,zaxis,man_datum_b alignment/rotate,yminus,to,man_datum_a,about,zplus alignment/trans,yaxis,man_datum_a alignment/trans,xaxis,man_c alignment/end mode/dcc dcc_datum_b=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<1.6683,0.8577,0>,<0,0,1> actl/<1.6683,0.8577,0>,<0,0,1> targ/<1.6683,0.8577,0>,<0,0,1> angle vec=<1,0,0>,square show feature parameters=no show contact parameters=yes numhits=5,numrows=2 spacer=0.4 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector show hits=no dcc_datum_a=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<1.7627,0,-0.8071>,<0,-1,0> actl/<1.7627,0,-0.8071>,<0,-1,0> targ/<1.7627,0,-0.8071>,<0,-1,0> angle vec=<1,0,0>,square show feature parameters=no show contact parameters=yes numhits=5,numrows=2 spacer=0.5 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector show hits=no dcc_datum_c=feat/contact/plane/default,cartesian,triangle,least_sqr theo/<0,2.7109,-0.5737>,<-1,0,0> actl/<0,2.7109,-0.5737>,<-1,0,0> targ/<0,2.7109,-0.5737>,<-1,0,0> angle vec=<0,0,1>,square show feature parameters=no show contact parameters=yes numhits=5,numrows=2 spacer=0.3 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector show hits=no dcc_datum_c=alignment/start,recall:startup,list=yes alignment/level,zplus,dcc_datum_b alignment/trans,zaxis,dcc_datum_b alignment/rotate,yminus,to,dcc_datum_a,about,zplus alignment/trans,yaxis,dcc_datum_a alignment/trans,xaxis,dcc_datum_c alignment/end datum_d =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.4807,1.475,-0.2275>,<0,0,1>,0.25,0.7075 actl/<1.4807,1.475,-0.2275>,<0,0,1>,0.25,0.7075 targ/<1.4807,1.475,-0.2275>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=5,numlevels=3,depth=0.0589,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_55_1 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.4807,1.475,-0.1037>,<0,0,1>,0.341,-0.2025 actl/<1.4807,1.475,-0.1037>,<0,0,1>,0.341,-0.2025 targ/<1.4807,1.475,-0.2275>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_55_2 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.95,1.475,-0.0837>,<0,0,1>,0.341,0.2025 actl/<1.95,1.475,-0.0837>,<0,0,1>,0.341,0.2025 targ/<1.95,1.475,-0.025>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_57_1 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.95,1.475,-0.2275>,<0,0,1>,0.25,0.4075 actl/<1.95,1.475,-0.2275>,<0,0,1>,0.25,0.4075 targ/<1.95,1.475,-0.2275>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_57.2 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.0114,1.475,-0.2275>,<0,0,1>,0.25,0.25 actl/<1.0114,1.475,-0.2275>,<0,0,1>,0.25,0.25 targ/<1.0114,1.475,-0.2275>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_55_3 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.0114,1.475,-0.1037>,<0,0,1>,0.341,0.2025 actl/<1.0114,1.475,-0.1037>,<0,0,1>,0.341,0.2025 targ/<1.0114,1.475,-0.025>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0787,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_29_1 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<0.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415 actl/<0.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415 targ/<0.9807,0.725,-0.0285>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no bub_29_2 =feat/contact/cylinder/default,cartesian,in,least_sqr theo/<1.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415 actl/<1.9807,0.725,-0.0872>,<0,0,1>,0.2735,0.3415 targ/<1.9807,0.725,-0.0285>,<0,0,1> start ang=0,end ang=360 angle vec=<1,0,0> direction=ccw show feature parameters=no show contact parameters=yes numhits=3,numlevels=2,depth=0.0587,end offset=0.0787,pitch=0 sample method=sample_hits sample hits=0,spacer=0 avoidance move=both,distance before=0.3937,distance after=0.3937,direction=along feature vector find hole=disabled,onerror=no,read pos=no show hits=no datdef/a,features=dcc_datum_a,, datdef/b,features=dcc_datum_b,, datdef/c,features=dcc_datum_c,, datdef/d,features=datum_d,, datdef/e,features=bub_70_datum_e,,
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |