Metrology Software Distribution - /PC-DMIS-Versions/Release/2022.1/SP8/x64> (hexagonmi.com)
Release Notes - 2022.1 SP8
**********************************
Application Errors
**********************************
You no longer get application errors:
• When you click Cancel in the Probe Utilities dialog box. See PCD-241798.
• When you delete a block of commands that contains ISO geometric tolerance
commands and then perform an Undo operation. See PCD-242686.
• When you select hits on the CAD model from the Graphic Display window and then
click Clear in the Construct feature dialog box. See PCD-242832.
**********************************
Constructed Features
**********************************
• You can now select the input feature as the center point when you create
Constructed Extreme Point features from the Construct Feature dialog box. See
PCD-214435.
DMIS
• You can now export DMO files for ISO tolerance commands. See PCD-241276.
**********************************
GD&T Dimensions
**********************************
• PC-DMIS now correctly draws the tolerance zone when you report the legacy
Angularity and Perpendicularity of a 3D line. See PCD-238331.
• PC-DMIS now retains the Workplane setting in the Geometric Tolerance dialog box
when you switch between ASME and ISO standards. See PCD-241818.
• PC-DMIS now correctly updates the Geometric Tolerance commands for the arrow
density when you generate a graphical analysis view. See PCD-243004.
**********************************
Legacy Dimensions
**********************************
• PC-DMIS now applies thickness correctly in dimension commands when you apply
actual thickness to auto plane features. See PCD-167531.
**********************************
Measurement Strategy Editor
**********************************
• PC-DMIS now correctly converts the Scan Speed and Acceleration values in the
Measurement Strategy Editor dialog box when a measurement routine is in inch
units. See PCD-235998.
• PC-DMIS now updates feature values after you apply smart parameters in the
Measurement Strategy Editor dialog box. See PCD-238583.
**********************************
Pointcloud
**********************************
• PC-DMIS now correctly displays the COP size when you delete COP commands
and then perform an Undo operation in the Edit window. See PCD-109759.
• You can now clear the COP surface colormaps created on an STL CAD model when
you select None from the Colormaps list. See PCD-239954.
• PC-DMIS now shows the Portable Scanning Widget toolbar when the current probe
is a laser probe. See PCD-241723.
**********************************
Portable
**********************************
• PC-DMIS now works correctly for the Auto Trigger plane with an auto line feature.
See PCD-228148.
**********************************
Probes
**********************************
• PC-DMIS now correctly maintains the scanning direction of a rotary scan when you
use the HP-OW laser probe with embedded controller machines. See PCD-241611.
• PC-DMIS now stores the last method to add tip angle in the Probe Utilities dialog
box as the default. See PCD-241854.
**********************************
Reporting
**********************************
• PC-DMIS now correctly exports multiple measurements in the Excel Form report
when a measurement routine contains a Max value. See PCD-240969.