hexagon logo
Register Sign in
  • Replies 27 replies
  • Subscribers 223 subscribers
  • Views 281 views
  • Users 0 members are here
Options
Related

Pass fail to tolerances

Peter Martignacco
Here is my problem. If I say I only want to report 3 digits and .005+/-.001 and the result is .0061 it will show me a fail. I want it to show me a pass. Same with .0039 want to show as a pass.

Anything in the software that I can turn on to correct the pass fail with that?

Any thoughts would helpful can think of some work arounds.
​
Parents
  • That's a terrible practice and effort should be made to curb it. If you have a -.001 tolerance and want a deviation of -.00149 to show as passed, you basically just gave it an extra 49% tolerance. My compromise after repeated discussions was to report 1 decimal place more than the print. Even with that, every time we get a new manufacturing supervisor or manager (even a QE one time!!), this issue is brought up again.
Reply
  • That's a terrible practice and effort should be made to curb it. If you have a -.001 tolerance and want a deviation of -.00149 to show as passed, you basically just gave it an extra 49% tolerance. My compromise after repeated discussions was to report 1 decimal place more than the print. Even with that, every time we get a new manufacturing supervisor or manager (even a QE one time!!), this issue is brought up again.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement