Part alignment when datums are not locked to one axis

Hello all,

How do I go about doing a part alignment on this part? The part is sitting on a 45 between Z and X axis and I can't remember how to lock it in i'm having severe brain fog. I'm used to parts being parallel to an axis which I have no problem aligning too. Just looking for the correct method. I dont use Xact.

Thanks!

Parents

Liambo734 over 1 year ago

NET1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3802.923,-559.115,808.487>,<-0.791583,0,-0.6110617>
ACTL/<3802.897,-559.185,808.651>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3802.923,-559.115,808.487>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3799.771,-561.882,802.295>
NET2 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3802.87,-565.997,808.556>,<-0.791583,0,-0.6110617>
ACTL/<3802.807,-566.067,808.691>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3802.87,-565.997,808.556>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3793.939,-566.009,783.681>
MOVE/POINT,NORMAL,<3759.673,-566.029,756.616>
TIP/T1A60B75, SHANKIJK=-0.5, 0.224, -0.837, ANGLE=82.376
MOVE/POINT,NORMAL,<3765.519,-602.977,776.506>
NET3 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3790.157,-603.669,825.025>,<-0.791583,0,-0.6110617>
ACTL/<3789.927,-603.743,825.022>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3790.157,-603.669,825.025>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3786.562,-603.88,819.059>
NET4 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3790.225,-611.19,824.936>,<-0.791583,0,-0.6110617>
ACTL/<3790.104,-611.263,825.016>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3790.225,-611.19,824.936>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3785.786,-608.908,802.703>
MOVE/POINT,NORMAL,<3774.902,-592.532,779.556>
MOVE/POINT,NORMAL,<3647.377,-592.554,779.501>
TIP/T1A60B90, SHANKIJK=-0.5, -0.001, -0.866, ANGLE=90.006
NET5 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3720.717,-565.693,914.978>,<-0.791583,0,-0.6110617>
ACTL/<3720.619,-565.787,915.085>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3720.717,-565.693,914.978>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3717.565,-565.696,907.247>
NET6 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3720.833,-574.499,914.828>,<-0.791583,0,-0.6110617>
ACTL/<3720.791,-574.593,914.976>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3720.833,-574.499,914.828>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3714.809,-574.512,884.606>
TIP/T1A60B75, SHANKIJK=-0.5, 0.224, -0.837, ANGLE=82.376
NET7 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3720.897,-636.285,914.746>,<-0.791583,0,-0.6110617>
ACTL/<3720.775,-636.379,914.819>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3720.897,-636.285,914.746>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3717.744,-637.162,907.421>
NET8 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3721.052,-645.18,914.545>,<-0.791583,0,-0.6110617>
ACTL/<3720.895,-645.274,914.588>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3721.052,-645.18,914.545>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3717.906,-635.06,884.716>
MOVE/POINT,NORMAL,<3621.69,-607.562,855.544>
MOVE/POINT,NORMAL,<3596.505,-607.565,855.534>
TIP/T1A30B90, SHANKIJK=-0.866, 0, -0.5, ANGLE=90.02
COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,OVC=NO,
Make sure B1 and B2 pins are removed!
B1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3733.267,-608.633,885.629>,<-0.791583,0,-0.6110617>,10.1
ACTL/<3733.344,-608.706,885.712>,<-0.7962997,0.002796,-0.6048958>,10.243
TARG/<3733.267,-608.633,885.629>,<-0.791583,0,-0.6110617>
START ANG=0,END ANG=360
ANGLE VEC=<-0.6110617,0,0.791583>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=STRAIGHT
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=4,DEPTH=0.7,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=3,SPACER=2
AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=5,DISTANCE AFTER=5,DIRECTION=ALONG FEATURE VECTOR
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3667.171,-608.651,831.718>
MOVE/POINT,NORMAL,<3681.517,-589.233,732.242>
B2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3846.411,-591.789,739.059>,<-0.791583,0,-0.6110617>,10.1
ACTL/<3846.697,-591.829,739.26>,<-0.7854843,0.0206479,-0.618537>,10.241
TARG/<3846.411,-591.789,739.059>,<-0.791583,0,-0.6110617>
START ANG=0,END ANG=360
ANGLE VEC=<-0.6110617,0,0.791583>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=STRAIGHT
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=4,DEPTH=0.7,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=3,SPACER=2
AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=5,DISTANCE AFTER=5,DIRECTION=ALONG FEATURE VECTOR
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
A3 =ALIGNMENT/START,RECALL:A2,LIST=YES
ALIGNMENT/ITERATE
PNT TARGET RAD=0.25,START LABEL=,FIXTURE TOL=0.05,ERROR LABEL=
MEAS ALL FEAT=NO,LEVEL AXIS=XAXIS,ROTATE AXIS=YAXIS,ORIGIN AXIS=ZAXIS
LEVEL=NET1,NET2,NET3,NET4,NET5,NET6,NET7,NET8,,
ROTATE=B1,B2,,
ORIGIN=B1,,
ALIGNMENT/END
DIM LOC7= LOCATION OF CIRCLE B1 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
X 3733.267 0.050 0.050 3733.465 0.198 0.148 -------->
Y -608.633 0.050 0.050 -608.633 0.000 0.000 ----#----
Z 885.629 0.050 0.050 885.629 0.000 0.000 ----#----
D 10.100 0.050 0.050 10.243 0.143 0.093 -------->
END OF DIMENSION LOC7
DIM LOC8= LOCATION OF CIRCLE B2 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
X 3846.411 0.050 0.050 3846.836 0.425 0.375 -------->
Y -591.789 0.050 0.050 -591.789 0.000 0.000 ----#----
Z 739.059 0.050 0.050 739.188 0.129 0.079 -------->
D 10.100 0.050 0.050 10.241 0.141 0.091 -------->
END OF DIMENSION LOC8

Reply

Liambo734 over 1 year ago

NET1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3802.923,-559.115,808.487>,<-0.791583,0,-0.6110617>
ACTL/<3802.897,-559.185,808.651>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3802.923,-559.115,808.487>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3799.771,-561.882,802.295>
NET2 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3802.87,-565.997,808.556>,<-0.791583,0,-0.6110617>
ACTL/<3802.807,-566.067,808.691>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3802.87,-565.997,808.556>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3793.939,-566.009,783.681>
MOVE/POINT,NORMAL,<3759.673,-566.029,756.616>
TIP/T1A60B75, SHANKIJK=-0.5, 0.224, -0.837, ANGLE=82.376
MOVE/POINT,NORMAL,<3765.519,-602.977,776.506>
NET3 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3790.157,-603.669,825.025>,<-0.791583,0,-0.6110617>
ACTL/<3789.927,-603.743,825.022>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3790.157,-603.669,825.025>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3786.562,-603.88,819.059>
NET4 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3790.225,-611.19,824.936>,<-0.791583,0,-0.6110617>
ACTL/<3790.104,-611.263,825.016>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3790.225,-611.19,824.936>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3785.786,-608.908,802.703>
MOVE/POINT,NORMAL,<3774.902,-592.532,779.556>
MOVE/POINT,NORMAL,<3647.377,-592.554,779.501>
TIP/T1A60B90, SHANKIJK=-0.5, -0.001, -0.866, ANGLE=90.006
NET5 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3720.717,-565.693,914.978>,<-0.791583,0,-0.6110617>
ACTL/<3720.619,-565.787,915.085>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3720.717,-565.693,914.978>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3717.565,-565.696,907.247>
NET6 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3720.833,-574.499,914.828>,<-0.791583,0,-0.6110617>
ACTL/<3720.791,-574.593,914.976>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3720.833,-574.499,914.828>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3714.809,-574.512,884.606>
TIP/T1A60B75, SHANKIJK=-0.5, 0.224, -0.837, ANGLE=82.376
NET7 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3720.897,-636.285,914.746>,<-0.791583,0,-0.6110617>
ACTL/<3720.775,-636.379,914.819>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3720.897,-636.285,914.746>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3717.744,-637.162,907.421>
NET8 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<3721.052,-645.18,914.545>,<-0.791583,0,-0.6110617>
ACTL/<3720.895,-645.274,914.588>,<-0.7917607,0.0019743,-0.6108283>
TARG/<3721.052,-645.18,914.545>,<-0.791583,0,-0.6110617>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3717.906,-635.06,884.716>
MOVE/POINT,NORMAL,<3621.69,-607.562,855.544>
MOVE/POINT,NORMAL,<3596.505,-607.565,855.534>
TIP/T1A30B90, SHANKIJK=-0.866, 0, -0.5, ANGLE=90.02
COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,OVC=NO,
Make sure B1 and B2 pins are removed!
B1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3733.267,-608.633,885.629>,<-0.791583,0,-0.6110617>,10.1
ACTL/<3733.344,-608.706,885.712>,<-0.7962997,0.002796,-0.6048958>,10.243
TARG/<3733.267,-608.633,885.629>,<-0.791583,0,-0.6110617>
START ANG=0,END ANG=360
ANGLE VEC=<-0.6110617,0,0.791583>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=STRAIGHT
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=4,DEPTH=0.7,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=3,SPACER=2
AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=5,DISTANCE AFTER=5,DIRECTION=ALONG FEATURE VECTOR
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<3667.171,-608.651,831.718>
MOVE/POINT,NORMAL,<3681.517,-589.233,732.242>
B2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<3846.411,-591.789,739.059>,<-0.791583,0,-0.6110617>,10.1
ACTL/<3846.697,-591.829,739.26>,<-0.7854843,0.0206479,-0.618537>,10.241
TARG/<3846.411,-591.789,739.059>,<-0.791583,0,-0.6110617>
START ANG=0,END ANG=360
ANGLE VEC=<-0.6110617,0,0.791583>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=STRAIGHT
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=4,DEPTH=0.7,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=3,SPACER=2
AVOIDANCE MOVE=BOTH,DISTANCE BEFORE=5,DISTANCE AFTER=5,DIRECTION=ALONG FEATURE VECTOR
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
A3 =ALIGNMENT/START,RECALL:A2,LIST=YES
ALIGNMENT/ITERATE
PNT TARGET RAD=0.25,START LABEL=,FIXTURE TOL=0.05,ERROR LABEL=
MEAS ALL FEAT=NO,LEVEL AXIS=XAXIS,ROTATE AXIS=YAXIS,ORIGIN AXIS=ZAXIS
LEVEL=NET1,NET2,NET3,NET4,NET5,NET6,NET7,NET8,,
ROTATE=B1,B2,,
ORIGIN=B1,,
ALIGNMENT/END
DIM LOC7= LOCATION OF CIRCLE B1 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
X 3733.267 0.050 0.050 3733.465 0.198 0.148 -------->
Y -608.633 0.050 0.050 -608.633 0.000 0.000 ----#----
Z 885.629 0.050 0.050 885.629 0.000 0.000 ----#----
D 10.100 0.050 0.050 10.243 0.143 0.093 -------->
END OF DIMENSION LOC7
DIM LOC8= LOCATION OF CIRCLE B2 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
X 3846.411 0.050 0.050 3846.836 0.425 0.375 -------->
Y -591.789 0.050 0.050 -591.789 0.000 0.000 ----#----
Z 739.059 0.050 0.050 739.188 0.129 0.079 -------->
D 10.100 0.050 0.050 10.241 0.141 0.091 -------->
END OF DIMENSION LOC8

Children

No Data