I have tried everything so get some consistent results, This is what calypso does to make this happen and would like to try and replicate it best I can to see if it works. It takes 26 vertical scans then makes and offset plane at the desired distance and makes a intersect point to each scan then makes a circle. I cant get pc-dmis to make the intersect point right where the plane meets the scan I makes me a point where the centroid of the scan would meet the plane so its way past the scan. I have tried vector points at the same height and distance and advance scans turn them into circles and noting is remotely close to the results that calypso gets. Thats why I'm trying this method.
Instead of intersection, have you selected pierce to see if it gave the correct values? Additionally, and typically with curves, the order of selection can modify the point creation, in this case I think you want to select the scan line/curve first then the plane.
Instead of intersection, have you selected pierce to see if it gave the correct values? Additionally, and typically with curves, the order of selection can modify the point creation, in this case I think you want to select the scan line/curve first then the plane.