Hey Guys, For some reason 2016 pc dmis decided it won't display diameter & roundness simultaneously. Diameter will display but the form won't. Is this a settings editor error or something else? I can go around this by having roundness callout separately but why the software decided out of the blue last week to exclude the form? See the snapshot.
Thanks in advance!
I would name the feature with ".", and I would change in tolerances 'all' by 'diameter' (I'm not at the cmm to check) and change the minus tol for the form to 0.
Does it work for CIR1_B ?
ALL names in Pcdmis MUST BE only numbers, letters, and the underscore _ or stupid things will happen. The . make Pcdmis try to see it as a number (1.003) and not as a label, the minus - makes Pcdmis try to see it as a math problem. Quotes are just as bad as those are using in coding.
What I observed is pcdmis will add RN below diameter only when typing RN. So it will work by typing it directly in the edit window but it won't display when checking the form box in the feature location window anymore. So at least that way it still works like before last week
ALL names in Pcdmis MUST BE only numbers, letters, and the underscore _ or stupid things will happen. The . make Pcdmis try to see it as a number (1.003) and not as a label, the minus - makes Pcdmis try to see it as a math problem. Quotes are just as bad as those are using in coding.
Even when I got rid of this long winded feature name pc dmis wouldn't budge.
Ok. I got rid of all quote & recreated the circle. Software still won't budge. Only by typing RN in the edit window it will still include roundness & diameter. In fact even going into old programs it will no longer display both even if the programs have this thing activated for the same circles.
