PCDMIS Automatically Changing Measured Angles To Nominals

Hello,

I have this option turned off in the F5 menu and it isn't happening with every angle, but some angle dimension nominals are changing every time the program is run to whatever the measured angle is. How can I prevent this from happening?

Parents

R2ah1ze1l over 1 year ago

You can also turn the nominal into a math algorithm, and it will prevent system updates, just add "+0" after the nominal value in your output. However, for your interest in using a variable to control the nominal see example:

            ASSIGN/ANG_NOM1=105
            COMMENT/REPT,
            Char. #: 296
DIM 296_1= 3D ANGLE FROM LINE LIN_296_1 TO LINE AXIS_BA ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX       MEAS    NOMINAL       +TOL       -TOL        DEV     OUTTOL
A      105.000  ANG_NOM1      2.000      2.000      0.000      0.000 -#--
DIM 296_2= 3D ANGLE FROM LINE LIN_296_4 TO LINE AXIS_BA ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX       MEAS    NOMINAL       +TOL       -TOL        DEV     OUTTOL
A      105.000    105.000+0      2.000      2.000      0.000      0.000 -#--

Reply

R2ah1ze1l over 1 year ago

            ASSIGN/ANG_NOM1=105
            COMMENT/REPT,
            Char. #: 296
DIM 296_1= 3D ANGLE FROM LINE LIN_296_1 TO LINE AXIS_BA ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX       MEAS    NOMINAL       +TOL       -TOL        DEV     OUTTOL
A      105.000  ANG_NOM1      2.000      2.000      0.000      0.000 -#--
DIM 296_2= 3D ANGLE FROM LINE LIN_296_4 TO LINE AXIS_BA ,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX       MEAS    NOMINAL       +TOL       -TOL        DEV     OUTTOL
A      105.000    105.000+0      2.000      2.000      0.000      0.000 -#--

Children

No Data