Your Products have been synced, click here to refresh
If a best fitted alignment is using these features, make sure the "iterate and re-pierce CAD" is turned off in the alignment.
SCN1 =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=965,SHOW HITS=NO,SHOWALLPARAMS=YES EXEC MODE=DEFINED, NOMS MODE=FIND NOMS,CLEARPLANE=NO,SINGLE POINT=NO,THICKNESS=0 FINDNOMS=0.025,SELECTEDONLY=NO,USEBESTFIT=NO,PROBECOMP=YES,AVOIDANCE MOVE=NO,DISTANCE=0,CAD Compensation=YES,4-axis scan=NO DIR1=NULLFILTER, HITTYPE=VECTOR INITVEC=0.6915131,-0.7171283,0.0868138 DIRVEC=0.723333,0.6904994,0 CUTVEC=0.000238,0.1204063,0.9927247 ENDVEC=-0.6914835,-0.7171168,0.087144 PLANEVEC=-0.7223923,0.6864734,-0.0830883 POINT1=0.5296,-0.2941,-0.075 POINT2=4.7286,-0.3024,-0.075 MEAS/SCAN BASICSCAN/LINE,NUMBER OF HITS=965,SHOW HITS=NO,SHOWALLPARAMS=YES <0.5296,-0.2941,-0.075>,<4.7286,-0.3024,-0.075>,CutVec=0.000238,0.1204063,0.9927247,DirVec=0.722364,0.6864614,-0.0834332 InitVec=0.6915131,-0.7171029,0.0870239,EndVec=-0.6915131,-0.7170906,0.0871247,THICKNESS=0 FILTER/NULLFILTER, EXEC MODE=DEFINED BOUNDARY/PLANE,<4.7286,-0.3024,-0.075>,PlaneVec=-0.7223922,0.6864734,-0.0830883,Crossings=1 HITTYPE/VECTOR NOMS MODE=FINDNOMS,0.025 ENDSCAN ENDMEAS/ WORKPLANE/ZPLUS LIN2 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO THEO/<0.6351,-0.3128,-0.0748>,<0.7248816,0.6888735,0> ACTL/<0.637,-0.3148,-0.0746>,<0.7285994,0.68494,0> CONSTR/LINE,BF,2D,SCN1.HIT[25..25],SCN1.HIT[26..26],SCN1.HIT[27..27],SCN1.HIT[28..28],SCN1.HIT[29..29],SCN1.HIT[30..30],SCN1.HIT[31..31],SCN1.HIT[32..32],SCN1.HIT[33..33],SCN1.HIT[34..34],, OUTLIER_REMOVAL/OFF,3 FILTER/OFF,WAVELENGTH=0 LIN3 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO THEO/<0.7397,-0.3126,-0.0751>,<-0.7248481,0.6889087,0> ACTL/<0.742,-0.3103,-0.0754>,<-0.7271733,0.6864539,0> CONSTR/LINE,BF,2D,SCN1.HIT[47..47],SCN1.HIT[46..46],SCN1.HIT[45..45],SCN1.HIT[44..44],SCN1.HIT[43..43],SCN1.HIT[42..42],SCN1.HIT[41..41],SCN1.HIT[40..40],SCN1.HIT[39..39],SCN1.HIT[38..38],SCN1.HIT[37..37],, OUTLIER_REMOVAL/OFF,3 FILTER/OFF,WAVELENGTH=0 PNT13 =FEAT/POINT,CARTESIAN,NO THEO/<0.6875,-0.263,-0.075>,<0.7248816,0.6888735,0> ACTL/<0.692,-0.2631,-0.075>,<0.7285994,0.68494,0> CONSTR/POINT,INT,LIN2,LIN3
If a best fitted alignment is using these features, make sure the "iterate and re-pierce CAD" is turned off in the alignment.
SCN1 =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=965,SHOW HITS=NO,SHOWALLPARAMS=YES EXEC MODE=DEFINED, NOMS MODE=FIND NOMS,CLEARPLANE=NO,SINGLE POINT=NO,THICKNESS=0 FINDNOMS=0.025,SELECTEDONLY=NO,USEBESTFIT=NO,PROBECOMP=YES,AVOIDANCE MOVE=NO,DISTANCE=0,CAD Compensation=YES,4-axis scan=NO DIR1=NULLFILTER, HITTYPE=VECTOR INITVEC=0.6915131,-0.7171283,0.0868138 DIRVEC=0.723333,0.6904994,0 CUTVEC=0.000238,0.1204063,0.9927247 ENDVEC=-0.6914835,-0.7171168,0.087144 PLANEVEC=-0.7223923,0.6864734,-0.0830883 POINT1=0.5296,-0.2941,-0.075 POINT2=4.7286,-0.3024,-0.075 MEAS/SCAN BASICSCAN/LINE,NUMBER OF HITS=965,SHOW HITS=NO,SHOWALLPARAMS=YES <0.5296,-0.2941,-0.075>,<4.7286,-0.3024,-0.075>,CutVec=0.000238,0.1204063,0.9927247,DirVec=0.722364,0.6864614,-0.0834332 InitVec=0.6915131,-0.7171029,0.0870239,EndVec=-0.6915131,-0.7170906,0.0871247,THICKNESS=0 FILTER/NULLFILTER, EXEC MODE=DEFINED BOUNDARY/PLANE,<4.7286,-0.3024,-0.075>,PlaneVec=-0.7223922,0.6864734,-0.0830883,Crossings=1 HITTYPE/VECTOR NOMS MODE=FINDNOMS,0.025 ENDSCAN ENDMEAS/ WORKPLANE/ZPLUS LIN2 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO THEO/<0.6351,-0.3128,-0.0748>,<0.7248816,0.6888735,0> ACTL/<0.637,-0.3148,-0.0746>,<0.7285994,0.68494,0> CONSTR/LINE,BF,2D,SCN1.HIT[25..25],SCN1.HIT[26..26],SCN1.HIT[27..27],SCN1.HIT[28..28],SCN1.HIT[29..29],SCN1.HIT[30..30],SCN1.HIT[31..31],SCN1.HIT[32..32],SCN1.HIT[33..33],SCN1.HIT[34..34],, OUTLIER_REMOVAL/OFF,3 FILTER/OFF,WAVELENGTH=0 LIN3 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO THEO/<0.7397,-0.3126,-0.0751>,<-0.7248481,0.6889087,0> ACTL/<0.742,-0.3103,-0.0754>,<-0.7271733,0.6864539,0> CONSTR/LINE,BF,2D,SCN1.HIT[47..47],SCN1.HIT[46..46],SCN1.HIT[45..45],SCN1.HIT[44..44],SCN1.HIT[43..43],SCN1.HIT[42..42],SCN1.HIT[41..41],SCN1.HIT[40..40],SCN1.HIT[39..39],SCN1.HIT[38..38],SCN1.HIT[37..37],, OUTLIER_REMOVAL/OFF,3 FILTER/OFF,WAVELENGTH=0 PNT13 =FEAT/POINT,CARTESIAN,NO THEO/<0.6875,-0.263,-0.075>,<0.7248816,0.6888735,0> ACTL/<0.692,-0.2631,-0.075>,<0.7285994,0.68494,0> CONSTR/POINT,INT,LIN2,LIN3
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |