hexagon logo
Register Sign in
  • Replies 23 replies
  • Subscribers 221 subscribers
  • Views 270 views
  • Users 0 members are here
Options
Related

Center axis as a datum not repeat

browningdmis
So here is what my opportunity for the day is.

Got a part with a lager Id bore that is datum b. Going into the part morr is a smaller bore with a position of .003 to b.

So my fcf used the drf to control it. Well the report does not show x and z as zeros. Engineering says datum b is zero so the report has to show everything as zero. So I did an alignment using just datum b( center line of the cylinder) the report show zeros but bad position and does not repeat. What am I missing

2023.1 geotol 9.15.8 global chrome
Parents
  • Off subject but management sure seems to disagree with you a lot. Sure hope you are considering a job search soon. Haha. They don't seem like a pleasant bunch to work with. If I had that kind of negative feedback constantly, I'd be out of there. Especially if they are just trying to do the bare minimum part checks instead of what should be done. They are picking a height gauge over you. But if you stay, I hope you can eventually win them over.
Reply
  • Off subject but management sure seems to disagree with you a lot. Sure hope you are considering a job search soon. Haha. They don't seem like a pleasant bunch to work with. If I had that kind of negative feedback constantly, I'd be out of there. Especially if they are just trying to do the bare minimum part checks instead of what should be done. They are picking a height gauge over you. But if you stay, I hope you can eventually win them over.
Children
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement