hexagon logo
Register Sign in
  • Replies 7 replies
  • Subscribers 221 subscribers
  • Views 92 views
  • Users 0 members are here
Options
Related

Auto Circles Measuring Basic

KTM4012
Hello, running 2020R2 and using a cad model I create 6 auto circles and when I run the program in DCC the results show it measured them at basic. (nominal .125 meas. .125) If I go in program mode and click 4 hits in the bore and then run in DCC it measures .1256 so I figure there is something wrong in the auto circle feature. I restarted PC Dmis and no change. Any ideas?

Update, I just tried an auto cylinder and it measured correct at .1257 so it seems to just be an auto circle issue.
Parents
  • I have never had issues with auto circles like that before.

    First off, how many points are you taking? Potentially post some code. How are you assessing the measured feature's diameter size? Within the auto feature itself or within a dimension of that auto feature? Are you executing the feature one by one or running the program from beginning to end completely in DCC?
Reply
  • I have never had issues with auto circles like that before.

    First off, how many points are you taking? Potentially post some code. How are you assessing the measured feature's diameter size? Within the auto feature itself or within a dimension of that auto feature? Are you executing the feature one by one or running the program from beginning to end completely in DCC?
Children
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement