How to extract PROBEDATA from autocal routine

​

Pretty sure its broken..
the variables are showing incorrect numbers, so im not sure if this PROBEDATA function is working properly in 2018R2 or am i doing something wrong?



LOADPROBE/2BARRELX50
AUTOCALIBRATE/PROBE, PARAMETER_SET=ALL-TIPS-WITH-DEFAULTS, QUALTOOL_MOVED=NO,
CHECK COLLISION=NO, SHOW_SUMMARY=YES, OVERWRITE_RESULTSFILE=NO
BEGIN AUTOCALIBRATE RESULTS FOR PROBE 2BARRELX50 USING SET ALL-TIPS-WITH-DEFAULTS
Probe file=2BARRELX50 Date=7/18/2023 Time=7:37:09 PM
Check Collision Disabled
T1A0B0 THEO X 0.0000 Y 0.0000 Z 291.0000 D 2.0000
T1A0B0 FAST X -0.0377 Y 0.1445 Z 290.1157 D 2.0000 PrbRdv 0.0088
T1A0B0 MEAS X -0.0393 Y 0.1495 Z 290.0839 D 2.0000 PrbRdv 0.0009 StdDev 0.0007
T1A22.5B180 THEO X -0.0000 Y -86.4099 Z 273.8120 D 2.0000
T1A22.5B180 FAST X -0.1100 Y -86.0661 Z 272.9171 D 2.0000 PrbRdv 0.0097
T1A22.5B180 MEAS X -0.1044 Y -86.0575 Z 272.8824 D 2.0000 PrbRdv 0.0010 StdDev 0.0007
T1A90B-90 THEO X 225.8000 Y 0.0000 Z 65.2000 D 2.0000
T1A90B-90 FAST X 225.4544 Y 0.4002 Z 64.6759 D 2.0000 PrbRdv 0.0089
T1A90B-90 MEAS X 225.4514 Y 0.4000 Z 64.6752 D 2.0000 PrbRdv 0.0082 StdDev 0.0131
T1A90B0 THEO X 0.0000 Y 225.8000 Z 65.2000 D 2.0000
T1A90B0 FAST X -0.1524 Y 225.8584 Z 64.8332 D 2.0000 PrbRdv 0.0081
T1A90B0 MEAS X -0.1523 Y 225.8581 Z 64.8323 D 2.0000 PrbRdv 0.0089 StdDev 0.0122
T1A90B90 THEO X-225.8000 Y 0.0000 Z 65.2000 D 2.0000
T1A90B90 FAST X-225.6122 Y 0.2742 Z 64.6422 D 2.0000 PrbRdv 0.0074
T1A90B90 MEAS X-225.6069 Y 0.2739 Z 64.6412 D 2.0000 PrbRdv 0.0059 StdDev 0.0110
T1A90B180 THEO X -0.0000 Y-225.8000 Z 65.2000 D 2.0000
T1A90B180 FAST X -0.0116 Y-225.1795 Z 64.5265 D 2.0000 PrbRdv 0.0067
T1A90B180 MEAS X -0.0114 Y-225.1770 Z 64.5258 D 2.0000 PrbRdv 0.0067 StdDev 0.0094
Standard deviations for probe calibration exceed limit.
T1A90B-90
T1A90B0
T1A90B90
END AUTOCALIBRATE RESULTS FOR PROBE 2BARRELX50 USING SET ALL-TIPS-WITH-DEFAULTS
ASSIGN/DEV=PROBEDATA ("standarddeviation" , "T1A90B-90" , "2BARRELX50") This shows me 0.0003???????
ASSIGN/PRBDV=PROBEDATA ("PrbRdv" , "T1A90B-90" , "2BARRELX50") This shows me -0.0007???????​​​​

i cant be the only one trying to do this? am i?

It works for me in 2019 R2. I don't have access to any other version to test it with.

the stddev works for me in V3.7

not quite sure why its giving me erroneous results then? ill try it at the machine

KatmandudaMeow Have you looked at the "auto check calibration limits" functionality?

https://docs.hexagonmi.com/pcdmis/2023.1/en/helpcenter/index.htm?rhcsh=1&rhnewwnd=0#t=mergedProjects%2Ftoolkitmodules%2FMisc%2Fcheck_calibration_limits%2FAbout_Check_Calibration_Limits.htm

I think it's been around for quite a few versions.

nice, i was looking in the help files earlier but couldnt find anything. this is what i needed thank you!

This can return data other than what is described in the Help files, depending on probe head type. For example, with an HP-S-X1H head PROBEDATA("diameter") simply returns the theoretical diameter, rather than actual as described in documentation. You'll have to conduct your own tests to figure out what values are returned for your machine.

Did you try without the probe file name ? (If this is not supplied, the current probe file is used)