hexagon logo
Register Sign in
  • Replies 17 replies
  • Subscribers 221 subscribers
  • Views 184 views
  • Users 0 members are here
Options
Related

Parts Measuring Exactly the Same

The Rook
Hope everyone is well on this Friday. I have a decent issue on my hands. I'm measuring a few parts to get a feel for what the numbers are. The first part was a completed part that inspected all the features. The next two parts are missing a giant bore in them. But wanted to check the position of some other holes.

The problem I'm having is that, my report shows the same numbers as from the first part. Its not updating to the newly measured parts. Any idead to as what I'm doing wrong? Thaks for your time.
Parents
  • Pnt12 =feat/contact/vector point/default,cartesian
    theo/<-0.4981,14.215,-3.0181>,<0,1,0>
    actl/<-0.4985,14.1851,-3.0184>,<0,1,0>
    targ/<-0.4981,14.215,-3.0181>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    pnt16 =feat/contact/vector point/default,cartesian
    theo/<0.6089,14.215,-2.1636>,<0,1,0>
    actl/<0.6089,14.1841,-2.1639>,<0,1,0>
    targ/<0.6089,14.215,-2.1636>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    b_face =feat/plane,cartesian,triangle,no
    theo/<-0.0093,14.215,-2.5712>,<0,1,0>
    actl/<-0.0097,14.1825,-2.5715>,<-0.0019187,0.9999664,0.0079753>
    constr/plane,bf,pnt10,pnt11,pnt12,,
    outlier_removal/off,3
    filter/off,wavelength=0

    move/clearplane

    pln6 =feat/plane,cartesian,triangle,no
    theo/<0.1452,14.215,-2.4693>,<0,1,0>
    actl/<0.145,14.1829,-2.4696>,<-0.0036262,0.9999687,0.007035>
    constr/plane,bf,pnt10,pnt11,pnt12,pnt16,,
    outlier_removal/off,3
    filter/off,wavelength=0

    datum_b =feat/contact/circle/default,cartesian,in,least_sqr
    theo/<0,14.215,-2.527>,<0,1,0>,1.28
    actl/<-0.0014,14.215,-2.4536>,<0,1,0>,1.2791
    targ/<0,14.215,-2.527>,<0,1,0>
    start ang=0,end ang=360
    angle vec=<-1,0,-0.000005>
    direction=ccw
    show feature parameters=no
    show contact parameters=yes
    numhits=5,depth=0.075,pitch=0
    sample method=sample_feature
    sample feature=none
    avoidance move=no,distance=0
    find hole=disabled,onerror=no,read pos=no
    show hits=no

    move/clearplane

    pnt13 =feat/contact/vector point/default,cartesian
    theo/<-0.0132,10.005,-5.154>,<0,1,0>
    actl/<-0.0134,10.001,-5.1544>,<0,1,0>
    targ/<-0.0132,10.005,-5.154>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    move/clearplane

    pnt14 =feat/contact/vector point/default,cartesian
    theo/<0.2484,10.005,-5.4711>,<0,1,0>
    actl/<0.2482,10.0064,-5.4714>,<0,1,0>
    targ/<0.2484,10.005,-5.4711>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    move/clearplane

    pnt15 =feat/contact/vector point/default,cartesian
    theo/<-0.215,10.005,-5.5485>,<0,1,0>
    actl/<-0.2152,10.0062,-5.549>,<0,1,0>
    targ/<-0.215,10.005,-5.5485>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    c_face =feat/plane,cartesian,triangle,no
    theo/<0.0067,10.005,-5.3912>,<0,1,0>
    actl/<0.0066,10.0045,-5.3916>,<-0.0029416,0.9998877,0.0146925>
    constr/plane,bf,pnt13,pnt14,pnt15,,
    outlier_removal/off,3
    filter/off,wavelength=0

    move/clearplane

    datum_c =feat/contact/circle/default,cartesian,in,least_sqr
    theo/<0,10.005,-5.402>,<0,1,0>,0.385
    actl/<0.0018,10.005,-5.3425>,<0,1,0>,0.3855
    targ/<0,10.005,-5.402>,<0,1,0>
    start ang=0,end ang=360
    angle vec=<-1,0,-0.000005>
    direction=ccw
    show feature parameters=no
    show contact parameters=yes
    numhits=5,depth=0.075,pitch=0
    sample method=sample_feature
    sample feature=none
    avoidance move=no,distance=0
    find hole=disabled,onerror=no,read pos=no
    show hits=no

    move/clearplane

    move/point,normal,<-0.0109,14.9606,3.6555>
    loadprobe/sta 1
    tip/t1a0b0, shankijk=0, -0.0043, 1, angle=-0.1188
    clearp/zplus,0.5,zplus,0.5,on
    move/clearplane

    cir11 =feat/contact/circle/default,cartesian,in,least_sqr
    theo/<0,2.875,-0.2966>,<-0.000005,0,1>,3.5
    actl/<-0.0002,2.6665,-0.2932>,<-0.0000044,-0.0024784,0.9999969>,3.5
    targ/<0,2.875,-0.2966>,<-0.000005,0,1>
    start ang=0,end ang=360
    angle vec=<1,0,0.000005>
    direction=ccw
    show feature parameters=no
    show contact parameters=yes
    numhits=5,depth=0.075,pitch=0
    sample method=sample_feature
    sample feature=none
    avoidance move=no,distance=0
    find hole=disabled,onerror=no,read pos=no
    show hits=no

    move/clearplane
    move/point,normal,<-7.1863,16.8440,1.2759>​
Reply
  • Pnt12 =feat/contact/vector point/default,cartesian
    theo/<-0.4981,14.215,-3.0181>,<0,1,0>
    actl/<-0.4985,14.1851,-3.0184>,<0,1,0>
    targ/<-0.4981,14.215,-3.0181>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    pnt16 =feat/contact/vector point/default,cartesian
    theo/<0.6089,14.215,-2.1636>,<0,1,0>
    actl/<0.6089,14.1841,-2.1639>,<0,1,0>
    targ/<0.6089,14.215,-2.1636>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    b_face =feat/plane,cartesian,triangle,no
    theo/<-0.0093,14.215,-2.5712>,<0,1,0>
    actl/<-0.0097,14.1825,-2.5715>,<-0.0019187,0.9999664,0.0079753>
    constr/plane,bf,pnt10,pnt11,pnt12,,
    outlier_removal/off,3
    filter/off,wavelength=0

    move/clearplane

    pln6 =feat/plane,cartesian,triangle,no
    theo/<0.1452,14.215,-2.4693>,<0,1,0>
    actl/<0.145,14.1829,-2.4696>,<-0.0036262,0.9999687,0.007035>
    constr/plane,bf,pnt10,pnt11,pnt12,pnt16,,
    outlier_removal/off,3
    filter/off,wavelength=0

    datum_b =feat/contact/circle/default,cartesian,in,least_sqr
    theo/<0,14.215,-2.527>,<0,1,0>,1.28
    actl/<-0.0014,14.215,-2.4536>,<0,1,0>,1.2791
    targ/<0,14.215,-2.527>,<0,1,0>
    start ang=0,end ang=360
    angle vec=<-1,0,-0.000005>
    direction=ccw
    show feature parameters=no
    show contact parameters=yes
    numhits=5,depth=0.075,pitch=0
    sample method=sample_feature
    sample feature=none
    avoidance move=no,distance=0
    find hole=disabled,onerror=no,read pos=no
    show hits=no

    move/clearplane

    pnt13 =feat/contact/vector point/default,cartesian
    theo/<-0.0132,10.005,-5.154>,<0,1,0>
    actl/<-0.0134,10.001,-5.1544>,<0,1,0>
    targ/<-0.0132,10.005,-5.154>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    move/clearplane

    pnt14 =feat/contact/vector point/default,cartesian
    theo/<0.2484,10.005,-5.4711>,<0,1,0>
    actl/<0.2482,10.0064,-5.4714>,<0,1,0>
    targ/<0.2484,10.005,-5.4711>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    move/clearplane

    pnt15 =feat/contact/vector point/default,cartesian
    theo/<-0.215,10.005,-5.5485>,<0,1,0>
    actl/<-0.2152,10.0062,-5.549>,<0,1,0>
    targ/<-0.215,10.005,-5.5485>,<0,1,0>
    snap=no
    show feature parameters=no
    show contact parameters=yes
    avoidance move=no,distance=0
    show hits=no

    c_face =feat/plane,cartesian,triangle,no
    theo/<0.0067,10.005,-5.3912>,<0,1,0>
    actl/<0.0066,10.0045,-5.3916>,<-0.0029416,0.9998877,0.0146925>
    constr/plane,bf,pnt13,pnt14,pnt15,,
    outlier_removal/off,3
    filter/off,wavelength=0

    move/clearplane

    datum_c =feat/contact/circle/default,cartesian,in,least_sqr
    theo/<0,10.005,-5.402>,<0,1,0>,0.385
    actl/<0.0018,10.005,-5.3425>,<0,1,0>,0.3855
    targ/<0,10.005,-5.402>,<0,1,0>
    start ang=0,end ang=360
    angle vec=<-1,0,-0.000005>
    direction=ccw
    show feature parameters=no
    show contact parameters=yes
    numhits=5,depth=0.075,pitch=0
    sample method=sample_feature
    sample feature=none
    avoidance move=no,distance=0
    find hole=disabled,onerror=no,read pos=no
    show hits=no

    move/clearplane

    move/point,normal,<-0.0109,14.9606,3.6555>
    loadprobe/sta 1
    tip/t1a0b0, shankijk=0, -0.0043, 1, angle=-0.1188
    clearp/zplus,0.5,zplus,0.5,on
    move/clearplane

    cir11 =feat/contact/circle/default,cartesian,in,least_sqr
    theo/<0,2.875,-0.2966>,<-0.000005,0,1>,3.5
    actl/<-0.0002,2.6665,-0.2932>,<-0.0000044,-0.0024784,0.9999969>,3.5
    targ/<0,2.875,-0.2966>,<-0.000005,0,1>
    start ang=0,end ang=360
    angle vec=<1,0,0.000005>
    direction=ccw
    show feature parameters=no
    show contact parameters=yes
    numhits=5,depth=0.075,pitch=0
    sample method=sample_feature
    sample feature=none
    avoidance move=no,distance=0
    find hole=disabled,onerror=no,read pos=no
    show hits=no

    move/clearplane
    move/point,normal,<-7.1863,16.8440,1.2759>​
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement