Metrology Software Distribution - /PC-DMIS-Versions/Release/2022.2/SP6/x64> (hexagonmi.com)
Release Notes - 2022.2 SP6
**********************************
Application Errors
**********************************
You no longer get an application error:
• When you select the Show Machine Volume check box in the Load Virtual
Machine dialog box after you type the LOADMACHINE command in the Edit
window and press F9. See PCD-244383.
• When you use the toolkit's best fit feature function. See PCD-245376.
• When you click the Next button in the Panel 1 area of the Optimize Path
Workflow dialog box for measurement routines that contain multiple LOADPROBE
commands. See PCD-246890.
**********************************
Auto Features
**********************************
• PC-DMIS now detects the void area correctly for sample hits for Auto Edge Point
and Auto Line features. See PCD-240122.
• You can now type values in the Levels dialog box when you change the number
of hits in the Edit window for a Cone, Sphere, Cylinder, or Torus feature. See
PCD-245472.
• You can now change the number of levels in the Levels dialog box when you
change the number of hits in the Edit window for a cylinder. See PCD-245759.
**********************************
CAD
**********************************
• PC-DMIS now correctly redraws the path lines based on the new selection when
you delete an item or a command from the Edit window in Summary mode with
Path lines from cursor turned on. See PCD-243565.
**********************************
Constructed Features
**********************************
• You can now create a constructed extracted Edge Point feature without any manual
changes in the Edit window. See PCD-241619.
**********************************
Custom Probe Builder
**********************************
• PC-DMIS now correctly displays polygon components in the graphic area of the
Custom Probe Builder Utility dialog box when you select Edit | Preferences |
Custom Probe Builder Utility. See PCD-231486.
**********************************
Dual Arm
**********************************
• PC-DMIS now correctly updates the Level, Rotate, and Translate alignments
associated with DATDEF commands in DMIS mode when you execute a
measurement routine in Dual Arm mode. See PCD-244442.
**********************************
Edit Window
**********************************
• PC-DMIS now correctly highlights the command text background color in Command
mode when you select Enable Background Highlighting check box in the Color
Editor dialog box. See PCD-244453.
**********************************
GD&T Dimensions
**********************************
• PC-DMIS now correctly displays a flatness analysis for Geometric Tolerance
commands in the Graphic Display window when you turn on the ReportGraph option
in the Edit window. See PCD-245556.
• PC-DMIS now correctly shows the lower tolerance value for the ISO Size tolerance
in the report. See PCD-246618.
• PC-DMIS now shows the correct value in the Secondary-tertiary basic angle box
of the Construct Point dialog box when you press F9 on the constructed point in
the Edit window. See PCD-246619.
**********************************
Laser
**********************************
• PC-DMIS now does not enable the Enable Filter check box again in the
Acceptance Angle Filter tab when you clear the check box and switch to other
tabs in the Probe Toolbox area of the Auto Feature and Scan dialog boxes. See
PCD-241153.
• You can now edit the move speed in the Measure Laser Probe dialog box when
you create an HP-L-10.10 probe file and select calibration. See PCD-243610.
**********************************
Legacy Dimensions
**********************************
• PC-DMIS now correctly adds the axes for the legacy Position dimension when you
select the Auto check box from the Axes area in the Position dialog box. See
PCD-110791.
• PC-DMIS no longer creates a hit index feature label in the Graphic Display window
when you click Create in the Feature Location dialog box. See PCD-243805.
**********************************
Pointcloud
**********************************
• PC-DMIS no longer displays an error message when there are no features available
in the feature list area in the Pointcloud Operator dialog box and you click Close
after you select Point Colormap or Surface Colormap from the Operator list. See
PCD-245893.
**********************************
Portable
**********************************
• PC-DMIS now correctly executes a measurement routine when you continue to
scan to evaluate all laser features. See PCD-245905.
**********************************
Reporting
**********************************
• PC-DMIS now generates a PDF of the report with nearly the same font size as in
the Report window so that the labels do not overlap. See PCD-229996.
• PC-DMIS now correctly updates the location of the labels for all the report pages
when you clear the Apply to page only check box in the Label Layout Wizard
dialog box. See PCD-239173.
• PC-DMIS now saves report settings correctly in the Report dialog box when
you save a measurement routine in versions earlier than PC-DMIS 2022.1. See
PCD-241322.
• You can now see correct deviation values in an Excel form report for the profile
dimensions. See PCD-242364.
• PC-DMIS no longer disables the All similar labels on this page and All similar
labels on this section options in the Apply Changes To area of the Properties
dialog box when you right-click on a label in the Report window and select Edit
Object. See PCD-245456.
• PC-DMIS now retains the label settings for all the pages of a report template when
you insert the object in a page and select Feature-Based Restricted in the Label
Layout Wizard dialog box. See PCD-PCD-246558.
**********************************
Temperature Compensation
**********************************
• PC-DMIS no longer shows the THERMALEXPANSIONORIGIN command in red
color in the Edit window when you use the advanced temperature compensation
command. See PCD-242361.
**********************************
Vision
**********************************
• You no longer get an error message stating that the illumination set is missing when
you run a measurement routine using automation. See PCD-246098.