Measure bolt holes circles

Can you send the code of how you created these lines?

Can you send the code of how you created these lines?

28 bc =feat/circle,cartesian,in,least_sqr,no
theo/<0,0.0167,0>,<0,1,0>,3.7795
actl/<-0.0004,0.0167,-0.001>,<0,1,0>,3.7796
constr/circle,bf,2d,cir3,cir4,cir5,cir6,cir7,cir8,cir9,cir10,,
outlier_removal/off,3
filter/off,upr=0
dim 28= location of circle 28 bc units=in ,$
graph=off text=off mult=10.00 output=both half angle=no
ax nominal +tol -tol meas dev outtol
x 0.0000 0.0050 0.0050 -0.0004 -0.0004 0.0000 ----#----
z 0.0000 0.0050 0.0050 -0.0010 -0.0010 0.0000 ---#-----
d 3.7800 0.0050 0.0050 3.7796 -0.0004 0.0000 ----#----
end of dimension 28
workplane/yplus
lin5 =feat/line,cartesian,unbounded,no
theo/<0,0.0167,0>,<0,0,1>
actl/<-0.0004,0.0167,-0.001>,<-0.0004414,0,0.9999999>
constr/line,bf,2d,28 bc,cir3,,
outlier_removal/off,3
filter/off,wavelength=0
lin6 =feat/line,cartesian,unbounded,no
theo/<0,0.0167,0>,<0.7071068,0,0.7071068>
actl/<-0.0004,0.0167,-0.001>,<0.7067069,0,0.7075065>
constr/line,bf,2d,28 bc,cir4,,
outlier_removal/off,3
filter/off,wavelength=0
workplane/yplus
dim angl1= 2d angle from line lin5 to line lin6 supplemental angle=no ,$
graph=off text=off mult=10.00 output=both
ax nominal +tol -tol meas dev outtol
a 45.0000 0.0004 0.0004 0.0000 -45.0000 44.9996 <--------
dim angl2= 2d angle from plane x minus plane to line lin6 supplemental angle=no ,$
graph=off text=off mult=10.00 output=both
ax nominal +tol -tol meas dev outtol
a -135.0000 0.0004 0.0004 0.0000 135.0000 134.9996 -------->