Application Errors
• When you click Apply in the Pointcloud Operator dialog box after you modify
the percentage (%) value in the Pointcloud size area for a CURVATURE type
Pointcloud filter operator. See PCD-247706.
• When you click New in the Measurement Strategy Editor dialog box to create a
custom Touch Trigger User Defined Plane strategy. See PCD-248212.
• When you try to create a generic construction feature using generic feature arrays
as the input. See PCD-249178.
Auto Features
• PC-DMIS now correctly displays all the labels under the Perimeter Controls area in
the Path Definition tab of the Auto Feature dialog box when you use the Adaptive
Free Form Plane Scan strategy. See PCD-246477.
• PC-DMIS now correctly creates a Cone feature from COP data when you select the
CAD Offset check box in the Feature Based Clipping area of the Auto Feature
dialog box. See PCD-247899.
• You can now correctly extract an Auto Cylinder feature when you select the
Remove outliers check box in the Laser Auto Feature dialog box. See
PCD-248770.
CAD
• PC-DMIS now generates the path lines faster. See PCD-247888.
Documentation
• The “ClearanceCube Definition - Constraints tab” topic in the PC-DMIS Core
documentation is now updated to remove information about Resize ClearanceCube.
See PCD-249367.
ESF (VWMP)
• You no longer get an error message that states “Object reference not set to
an instance of an Object” when you press F9 in the Edit window to open an
ESF (VWMP) Laser feature that you have created with flipped edge vectors.
See PCD-247483.
Execution
• You no longer need to re-execute the program when the Tracker Beam is reset after
the Operator comment message box is displayed. See PCD-241826.
• You no longer get an error message that states “Unable to generate safe
ClearanceCube motion” when you execute a measurement routine that includes
a tip change command. See PCD-248545.
GD&T Dimensions
• You can now see the correct per unit flatness and unit shape in the Feature Control
Frame Editor in the Feature Control Frame tab of the Geometric Tolerance dialog
box when you work with GD&T Selection Mode (from CAD). See PCD-212704.
HxGN Robotic Automation
• PC-DMIS now retains the actual values for Generic Point features that are not
measured by Robotic Automation. Only the Generic Point features within the
Robotic Automation program are updated with the new measured value. See
PCD-245303.
Legacy Dimensions
• You can now see the correct upper and lower tolerance values in the Edit window,
as per the ISO standard 286-1:2010 + AC:2013 (D), for a location dimension with
Tolerance Class (M) and Tolerance Grade (IT6). See PCD-53902.
Moves
• You can now see that the probe head moves to a reasonable safe height, instead of
a very high height, when you define ClearanceCube motion for the TIP command.
See PCD-248632.
Notification
• You can now see the correct information icon in the message box that states
“Upload to Nexus was successful”. See PCD-248332.
Pointcloud
• PC-DMIS now sets the last used filter Type as the default in the PointCloud
Operator dialog box when you create a COP filter. See PCD-240929.
• PC-DMIS now correctly creates the COP Select Operator command when you click
OK in the Pattern Setup dialog box after you set the angular offset between pattern
occurrences and the number of times to offset a pattern. See PCD-243806.
Reporting
• PC-DMIS now displays the ELOGO.DAT information (footer) when you print PDF or
RTF reports that do not have a defined rule. See PCD-246171.
• PC-DMIS now generates only one Excel report, instead of two, to upload to
the Metrology Reporting Cloud when you execute a measurement routine. See
PCD-248615.
Vision
• PC-DMIS now correctly executes a measurement routine when you copy and
paste parameters from one Auto Line feature to another Auto Line feature. See
PCD-243528.
• You no longer get an error message stating that the illumination set is missing when
you run a measurement routine using automation. See PCD-246098.
https://downloads.ms.hexagonmi.com/PC-DMIS-Versions/Release/2023.2/SP1/