https://downloads.ms.hexagonmi.com/PC-DMIS-Versions/Release/2022.2/SP7/x64
Release Notes - 2022.2 SP7
**********************************
Application Errors
**********************************
You no longer get application errors:
• When you open or create a measurement routine and use the pre-defined
illumination quick set in the Probe Toolbox. See PCD-247293.
• When you try to create a generic construction feature using generic feature arrays
as the input. See PCD-249178.
**********************************
CAD
**********************************
• PC-DMIS now generates the path lines faster. See PCD-247888.
**********************************
Constructed Features
**********************************
• The Construct Plane dialog box now correctly retains the selected features in the
feature list area when you switch the construction method between Best Fit and BF
Recomp for a Constructed Plane. See PCD-247418.
**********************************
Execution
**********************************
• You no longer need to re-execute the program when the Tracker Beam is reset after
the Operator comment message box is displayed. See PCD-241826.
**********************************
GD&T Dimensions
**********************************
• You can now see that an expression that uses the .meas extension returns the
same value when it references the Geometric Tolerance command as it did when it
referenced the Xact Measure command. See PCD-244140.
• You can now see the size dimensions in the Report window when you migrate from
XactMeasure to Geometric Tolerance commands. See PCD-249215.
• PC-DMIS now correctly retains the datums when you press Ctrl + U to execute
a measurement routine from the cursor’s current location inside a loop. See
PCD-249256.
• You can now select a 3D Width feature to create a Profile of a Line tolerance using
the ISO 1101 GD&T Standard. See PCD-249936.
**********************************
Graphical Analysis Window
**********************************
• PC-DMIS now correctly retains the new value as the default when you click Default
after you modify the Sphere size from the Display Options tab of the Graphical
Analysis dialog box. This means, PC-DMIS now saves the new value to the
UserSettings.json file. See PCD-249759.
**********************************
Measurement Strategy Editor
**********************************
• PC-DMIS no longer allows you to delete all the rows when you edit smart
parameters in the Measurement Strategy Editor dialog box. See PCD-225366.
**********************************
Notifications - Edge Client
**********************************
• PC-DMIS now sends all Geometric Tolerance command ID's to HxGN Metrology
Reporting. See PCD-235771.
**********************************
Pointcloud
**********************************
• PC-DMIS now disables the options on the right side of the Pointcloud Operator
dialog box when you select the Create annotation points check box in the
Pointcloud Operator dialog box. See PCD-161680.
• PC-DMIS now sets the last used filter Type as the default in the PointCloud
Operator dialog box when you create a COP filter. See PCD-240929.
**********************************
Vision
**********************************
• PC-DMIS now correctly executes a measurement routine when you copy and
paste parameters from one Auto Line feature to another Auto Line feature. See
PCD-243528.
• PC-DMIS now correctly updates the COVERAGE ACTIVE TARGETS value when
you change in the Edit window, Command mode after you change the COVERAGE
value. See PCD-249071.